RME M-16 DA [30/57] Technical specifications

RME M-16 DA [30/57] Technical specifications
30
User’s Guide M-32 DA © RME
15. Technical Specifications
15.1 Analog
Line Out, TRS
Maximum output level: +21 dBu
Output: 6.3 mm TRS jack, servo-balanced
Output impedance: 75 Ohm
Output level switchable +13 dBu, +19 dBu @ 0 dBFS
Line Out, D-Sub
Maximum output level: +27 dBu
Output: D-sub 25-pin, electronically balanced
Output impedance: 150 Ohm
Output level switchable +13 dBu, +19 dBu, +24 dBu @ 0 dBFS
DA-Conversion
Resolution: 24 bit
Signal to Noise ratio (SNR) @ +24 dBu, 44.1 kHz: 115 dB RMS unweighted, 118 dBA
Signal to Noise ratio (SNR) @ +19 dBu: 115 dB RMS unweighted, 118 dBA
Signal to Noise ratio (SNR) @ +13 dBu: 115 dB RMS unweighted, 118 dBA
Frequency response @ 44.1 kHz, -0.5 dB: 5 Hz – 22 kHz
Frequency response @ 96 kHz, -0.5 dB: 5 Hz – 34 kHz
Frequency response @ 192 kHz, -1 dB: 5 Hz – 50 kHz
THD: < - 104 dB, < 0.00063 %
THD+N: < -100 dB, < 0.001 %
Channel separation: > 110 dB
15.2 Digital Inputs
ADAT Optical
4 x TOSLINK, according to Alesis specification
Standard: 32 channels 24 bits, up to 48 kHz
S/MUX: 16 channels 24 bits 96 kHz
S/MUX4: 8 channels 24 bits 192 kHz
Bitclock PLL ensures perfect synchronisation even in varispeed operation
Lock Range: 31.5 kHz – 50 kHz
Jitter when synced to input signal: < 1 ns
Jitter suppression: > 30 dB (2.4 kHz)
Word Clock
BNC, not terminated (10 kOhm)
Switch for internal termination 75 Ohm
Automatic Double/Quad Speed detection and internal conversion to Single Speed
SteadyClock guarantees super low jitter synchronization even in varispeed operation
Not affected by DC-offsets within the network
Signal Adaptation Circuit: signal refresh through auto-center and hysteresis
Overvoltage protection
Level range: 1.0 Vpp – 5.6 Vpp
Lock Range: 27 kHz – 200 kHz
Jitter when synced to input signal: < 1 ns
Jitter suppression: > 30 dB (2.4 kHz)

Содержание

Скачать