RME HDSPe MADI [65/72] Digital

User's Guide HDSPe MADI © RME

Stereo Monitor Output (Phones)

• Signal to Noise ratio (SNR): 115 dB RMS unweighted, 118 dBA @ 44.1 kHz (unmuted)

• THD: < - 104 dB, < 0.00063 %

• THD+N: < -102 dB, < 0.0008 %

• Crosstalk: > 100 dB

• Frequency response @ 44.1 kHz, -0.5 dB: 5 Hz – 22 kHz

• Frequency response @ 96 kHz, -0.5 dB: 5 Hz – 45.9 kHz

• Frequency response @ 192 kHz, -1 dB: 5 Hz – 66.5 kHz

• Output: 6.3 mm / 1/4" TRS jack

• Output impedance: 75 Ohm

• Output level @ 0 dBFS: +13 dBu

29.3 Digital

• Clocks: Internal, MADI In, Word Clock In, optional Video and LTC In

• Low jitter design: < 1 ns in PLL mode, all inputs

• Internal clock: 800 ps jitter, random spread spectrum

• Jitter suppression of external clocks: about 30 dB (2.4 kHz)

• Effective clock jitter influence on DA conversion: near zero

• Provides nearly jitter-free word clock directly from the MADI input signal

• Input PLL ensures zero dropout, even at more than 100 ns jitter

• Supported sample rates: 28 kHz up to 200 kHz

• Compliant with PCI Express Base Specification v1.1

• 1-Lane PCI Express Endpoint device (no PCI Express to PCI Bridge)

• 2.5 Gbps line speed

• Packet-based full-duplex communication (up to 500 MB/s transfer rate)

29.4 MIDI

• 2 x MIDI I/O via breakout cable

• 1 x MIDI I/O via MADI

• PCIe bus based hi-speed operation

• Separate 128 byte FIFO for input and output

• MIDI state machine in hardware for reduced interrupt request load

• Invisible transmission via User bit of channel 56 (up to 48 kHz)

• Invisible transmission via User bit of channel 28 (up to 96 kHz)