AMERICAN DJ Zipper Руководство по эксплуатации онлайн [5/14] 777837

ADJ Products, LLC - www.adj.com - Zipper Instruction Manual Page 9ADJ Products, LLC - www.adj.com - Zipper Instruction Manual Page 8

Zipper System Menu

System Menu: When making adjustments press ENTER to

conrm your setup then press and hold the MENU button

for at least 3 seconds. To exit without making any adjust-

ments press the MENU button. The display will lock after 30

seconds, press the MENU button for 3 seconds to unlock.

ADDR - DMX Address Setting.

1. Press the MENU button until “ADDR” is displayed, press

ENTER.

2. The current address will now be displayed and ashing.

Press the UP or DOWN buttons to nd your desired address.

When you have found your desired DMX address press ENTER

then press and hold the MENU button for at least 3 seconds to

set your desired DMX address.

3. Connect your DMX Controller.

CHND - This will let select your desired DMX channel

mode.

1. Press the MENU button until “CHND” is displayed, press

ENTER. Either “1CH”, “3CH”, or “11CH” will be displayed

2. Press the UP or DOWN buttons to nd your desired DMX

channel mode and press ENTER to conm and exit.

SLND - This will let you set unit as a slave in a master-

slave conguration.

1. Press the MENU button until “SLND” is displayed, press

ENTER. Either “MAST”, “SL 1” or “SL 2” will be displayed.

2. Press the UP or DOWN buttons until your desired setting is

displayed, and press ENTER to conm.

NOTE: In a Master/Slave conguration you can set one xture

to Master and then set the next xture to “SL 2”, the xtures

Zipper System Menu