Infiniti G35 Coupe (2007) [111/328] Programming homelink

PROGRAMMING HomeLink

To program your HomeLink Transceiver

to operate a garage door, gate, or entry

door opener, home or office lighting, you

need to be at the same location as the

device. Note: Garage door openers (manu-

factured after 1996) have “rolling code

protection”. To program a garage door

opener equipped with “rolling code pro-

tection”; you will need to use a ladder to

get up to the garage door opener motor to

be able to access the “training” program

button.

1. To begin, push and hold the 2 outer

HomeLink

buttons (to clear the

memory) until the indicator light

blinks (after 20 seconds). Release both

buttons.

2. Position the end of the hand-held trans-

mitter 1 to 3 in (26 to 76 mm) away from

the HomeLink

surface.

3. Using both hands, simultaneously

push and hold both the HomeLink

button you want to program and the

hand-held transmitter button.

DO NOT release the buttons until step

4 has been completed.

4. Hold down both buttons until the indi-

cator light on the HomeLink

flashes,

changing from a “slow blink” to a

“rapid blink”. When the indicator light

flashes rapidly, both buttons may be

released. The rapidly flashing light in-

dicates successful programming. To

activate the garage door or other pro-

grammed device, push and hold the

SIC3012 SIC3011

Instruments and controls 2-43

w 06.6.30/V35-D/V5.0 X