Infiniti G35 Coupe (2007) [112/328] For canadian customers
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Infiniti G35 Coupe (2007) [112/328] For canadian customers

Infiniti G35 Coupe (2007) [112/328] For canadian customers
programmed HomeLink button - re-
leasing when the device begins to ac-
tivate.
5. If the indicator light on the HomeLink
blinks rapidly for two seconds and then
turns solid, HomeLink
has picked up a
“rolling code” garage door opener sig-
nal. You will need to proceed with the
next steps to train the HomeLink
to
complete the programming which may
require a ladder and another person for
convenience.
6. Push and release the training button
located on the garage door opener’s
motor to activate the “training mode”.
This button is usually located near the
antenna wire that hangs down from
the motor. If the wire originates from
under a light lens, you will need to re-
move the lens to access the training
button.
NOTE:
Once you have pushed and released the
training button on the garage door open-
er’s motor and the “training light” is lit,
you have 30 seconds in which to perform
step 7. Use the help of a second person for
convenience to assist when performing
this step.
7. Quickly within 30 seconds of pushing
and releasing the garage door opener
program button, firmly push and re-
lease the HomeLink
button you’ve
just programmed. Push and release
the HomeLink
button up to three
times to complete the training.
8. Your HomeLink
button should now be
programmed.
To program the remaining HomeLink
buttons for additional door or gate
openers, follow steps 2 through 8
only.
NOTE:
Do not repeat step one unless you want to
“clear” all previously programmed
HomeLink
buttons.
If you have any questions or are having
difficulty programming your HomeLink
buttons, refer to the HomeLink web site
at: www.homelink.com or call 1-800-355-
3515.
PROGRAMMING HomeLink FOR
CANADIAN CUSTOMERS
Prior to 1992, D.O.C. regulations required
hand-held transmitters to stop transmit-
ting after 2 seconds. To program your
hand-held transmitter to HomeLink
, con-
tinue to push and hold the HomeLink
button (note steps 2 through 4 under
“Programming HomeLink
”) while you
push and re-push (“cycle”) your hand-
held transmitter every 2 seconds until the
indicator light flashes rapidly (indicating
successful programming).
NOTE:
If programming a garage door opener, etc.,
it is advised to unplug the device during
the “cycling” process to prevent possible
damage to the garage door opener compo-
nents.
OPERATING THE HomeLink
UNIVERSAL TRANSCEIVER
The HomeLink Universal Transceiver
(once programmed) may now be used to
activate the garage door, etc. To operate,
simply push the appropriate programmed
HomeLink
Universal Transceiver button.
The red indicator light will illuminate
while the signal is being transmitted.
PROGRAMMING
TROUBLE-DIAGNOSIS
If the HomeLink does not quickly learn
the hand-held transmitter information:
O replace the hand-held transmitter bat-
2-44 Instruments and controls
w 06.6.30/V35-D/V5.0 X

Содержание

Похожие устройства

Скачать