Infiniti G35 Coupe (2007) [298/328] Installing front license plate

Use the following steps to mount the li-

cense plate:

Before mounting the license plate, con-

firm that the following parts are enclosed

in the vinyl bag.

O License plate bracket

O J-nut x 2

O Screw x 2

O Screw grommet x 2

1. Temporarily place the license plate

bracket and mark the pilot hole points

using holes

while aligning the

towing hook hole of the front bumper

fascia.

2. Remove the license plate bracket.

3. Carefully drill two pilot holes

using

a 0.39 in (10 mm) drill bit at the

marked locations. (Be sure that the

drill only goes through the fascia, or

damage to the nut may occur.)

4. Insert grommets into the hole on the

fascia.

5. Insert a flat-blade screwdriver into the

grommet hole to turn part

90 de-

grees.

STI0332

INSTALLING FRONT LICENSE PLATE

9-12 Technical and consumer information

w 06.6.30/V35-D/V5.0 X