Infiniti G35 Coupe (2007) [207/328] Accelerator downshift in d position
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Infiniti G35 Coupe (2007) [207/328] Accelerator downshift in d position

Infiniti G35 Coupe (2007) [207/328] Accelerator downshift in d position
D (Drive):
Use this position for all normal forward
driving.
Manual shift mode
When the selector lever is shifted from
the D position to the manual shift gate
with the vehicle stopped or while driving,
the transmission enters the manual shift
mode. Shift range can be selected manu-
ally.
When shifting up, move the selector lever
to the + (up) side. The transmission shifts
to the higher range.
When shifting down, move the selector le-
ver to the − (down) side. The transmission
shifts to the lower range.
In the manual shift mode, the shift range
is displayed on the position indicator in
the meter.
Shift ranges up or down one by one as
follows:
1
M
→
←
2
M
→
←
3
M
→
←
4
M
→
←
5
M
5
M
(5th):
Use this position for all normal forward
driving.
4
M
(4th):
For driving up or down long slopes where
engine braking would be advantageous.
3
M
(3rd) and 2
M
(2nd):
Use for hill climbing or engine braking on
downhill grades.
1
M
(1st):
Use this position when climbing steep
hills slowly or driving slowly through
deep snow, or for maximum engine
braking on steep downhill grades.
O Remember not to drive at high speeds
for extended periods of time in lower
than 5
M
range. This reduces gas
mileage.
O Moving the selector lever rapidly to
the same side twice will shift the
ranges in succession.
O When canceling the manual shift
mode, return the selector lever to the
D position. The transmission returns
to the normal driving mode.
O In the manual shift mode, the transmis-
sion may not shift to the selected gear.
This helps maintain driving perfor-
mance and reduces the chance of ve-
hicle damage or loss of control.
O In the manual shift mode, the transmis-
sion automatically shifts down to 1st
gear before the vehicle comes to a
stop. When accelerating again, it is
necessary to shift up to the desired
range.
Accelerator downshift
— In D position —
For passing or hill climbing, fully depress
the accelerator pedal to the floor. This
shifts the transmission down into the
lower gear, depending on the vehicle
speed.
Fail-safe
When the fail-safe operation occurs, the
automatic transmission will be locked in
the 4th gear.
If the vehicle is driven under extreme con-
ditions, such as excessive wheel spinning
and subsequent hard braking, the fail-safe
system may be activated. This will occur
even if all electrical circuits are functioning
properly. In this case, turn the ignition
switch to the OFF position and wait for 3
seconds. Then turn the key back to the ON
position. The vehicle should return to its
Starting and driving 5-13
w 06.6.30/V35-D/V5.0 X

Содержание

Похожие устройства

Скачать