Infiniti FX45 (2006) [239/392] Temporary disabled status at high temperature

Infiniti FX35 (2006) [239/392] Temporary disabled status at high temperature
To cancel the LDW system, push the LDW
switch
j
1
to turn off the LDW system ON in-
dicator
j
2
. To turn on the system, push the
LDW switch
j
1
again.
In the manual mode, the LDW system will
be off when the ignition switch is turned to
the ON position. The LDW switch must be
pushed to turn on the system.
To change modes, push and hold the LDW
switch
j
1
for more than 4 seconds when
the LDW system ON indicator
j
2
is off. A
chime will sound and blinking of the LDW
system indicator indicates that the mode
change has been completed.
When the vehicle approaches either the left
or the right of the traveling lane while
driving over approximately 45 MPH (72
km/h), the LDW indicator
j
3
on the instru-
ment panel flashes and a chime sounds to
alert the driver.
When you use the lane change signal and
change your traveling lane, the LDW
system will enter the standby mode until
the lane change is completed. Once the ve-
hicle completes the lane change and the
camera detects lane markers, the LDW sys-
tem starts again to monitor lane markers.
When the vehicle speed lowers to less than
approximately 45 MPH (72 km/h), the LDW
system enters standby mode. When the ve-
hicle speed increases to more than 45 MPH
(72 km/h) again, the LDW system activates.
Temporary disabled status at high
temperature
If the vehicle is parked in direct sunlight
under high temperature conditions (over
approximately 104°F (40°C)) and then
started, the lane departure warning system
may cancel automatically. The LDW switch
ON indicator will blink.
When the interior temperature is reduced,
the system will again operate automati-
cally and the LDW switch ON indicator illu-
minates.
SSD0411
Starting and driving 5-21
Z 05.11.2/S50-D/V5.0 X

Содержание

Похожие устройства

Скачать