Infiniti FX45 (2006) [35/392] S50 d v5

4. Allow the seat belt to retract. Pull up the

shoulder belt to remove any slack in the

belt.

5. Before placing the child in the child re-

straint, use force to push the child re-

straint from side to side, and tug it for-

ward to make sure that it is securely

held in place. It should not move more

than 1 inch (25 mm). If it does move

more than 1 inch (25 mm), pull again on

the shoulder belt to further tighten the

child restraint. If unable to properly se-

cure the restraint, move the restraint to

another rear seating position and try

again, or try a different child restraint.

Not all child restraints fit in all types of

vehicles.

6. Check that the retractor is in the auto-

matic locking mode by trying to pull

more belt out of the retractor. If you

cannot pull any more belt webbing out

of the retractor, the belt is in the auto-

matic locking mode.

7. Check to make sure that the child re-

straint is properly secured prior to each

use. If the belt is not locked, repeat

steps 3 through 6.

After the child restraint is removed and the

seat belt is allowed to wind back into the

retractor, the automatic locking mode

(child restraint mode) is canceled.

SSS0259A SSS0260A

Safety — Seats, seat belts and supplemental restraint system 1-25

Z 05.11.1/S50-D/V5.0 X