Infiniti FX45 (2006) Руководство по эксплуатации онлайн [339/392] 778228
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Infiniti FX45 (2006) Руководство по эксплуатации онлайн [339/392] 778228

Infiniti FX45 (2006) Руководство по эксплуатации онлайн [339/392] 778228
j
2
TIN (Tire Identification Number) for a
new tire (example: DOT XX XX XXX
XXXX)
1. DOT: Abbreviation for the “Depart-
ment of Transportation”. The
symbol can be placed above,
below or to the left or right of
Tire Identification Number.
2. Two-digit code: Manufacturer’s iden-
tification mark
3. Two-digit code: Tire size
4. Three-digit code: Tire type code (Op-
tional)
5. Three-digit code: Date of Manufacture
6. Four numbers represent the week and
year the tire was built. For example,
the numbers 3103 means the 31st
week of 2003. If these numbers are
missing, then look on the other side-
wall of the tire.
j
3
Tire ply composition and material
The number of layers or plies of
rubber-coated fabric in the tire.
Tire manufacturers also must indicate
the materials in the tire, which in-
clude steel, nylon, polyester, and
others.
j
4
Maximum permissible inflation pres-
sure
This number is the greatest amount of
air pressure that should be put in the
tire. Do not exceed the maximum per-
missible inflation pressure.
j
5
Maximum load rating
This number indicates the maximum
load in kilograms and pounds that
can be carried by the tire. When re-
placing the tires on the vehicle, al-
ways use a tire that has the same
load rating as the factory installed
tire.
j
6
Term of “tubeless” or “tube type”
Indicates whether the tire requires an
inner tube (“tube type”) or not (“tube-
less”).
j
7
The word “radial”
The word “radial” is shown if the tire
has radial structure.
j
8
Manufacturer or brand name
Manufacturer or brand name is
shown.
Other tire-related terminology:
In addition to the many terms that are
defined throughout this section, In-
tended Outboard Sidewall is (1) the side-
wall that contains a whitewall, bears
white lettering or bears manufacturer,
brand and/or model name molding that
is higher or deeper than the same
molding on the other sidewall of the tire,
or (2) the outward facing sidewall of an
asymmetrical tire that has a particular
side that must always face outward when
mounted on a vehicle.
SDI1607
Example
Maintenance and do-it-yourself 8-39
Z 05.11.2/S50-D/V5.0 X

Содержание

Похожие устройства

Скачать