Home
Главная
Stihl
Воздуходувка Ранцевая
BR 800
Руководство по эксплуатации Страница: 7

Stihl BR 800 Руководство по эксплуатации онлайн [7/80] 779239

BR 800, BR 800 X

English

If this tool is subjected to unusually high

loads for which it was not designed (e.g.

heavy impact or a fall), always check

that it is in good condition before

continuing work. Check in particular that

the fuel system is tight (no leaks) and

that the controls and safety devices are

working properly. Do not continue

operating this machine if it is damaged.

In case of doubt, have it checked by your

STIHL servicing dealer.

WARNING

Small particles (e.g. dust) blown through

the blower tubes and nozzle can cause

a static charging of the blower tubes.

This is especially true in low humidity

and high dust conditions. In order to

reduce the risk of shock from static

charging and subsequent injury from

loss of control, your blower has features

designed to help reduce the build up of

static electricity in the blower tubes and

equalize the charge with the engine

and/or operator:

The control handle is designed to

conduct static electricity through the

throttle cable to the engine and from the

handle through the operator to the

ground.

STIHL offers an optional kit for use in

especially dry and dusty conditions. The

kit contains: (1) blower tubes made with

graphite to help conduct the charge back

to the control handle, and (2) a metal

ring with "wire" for insertion in the end

tube that helps reduce the buildup of

static electricity.

If your blower is properly assembled and

you are still experiencing static shocks,

make sure that your foot ware has

conductive soles and try operating your

unit without gloves, which may be

interfering with the conduction of the

charge.

THE USE OF THE POWER TOOL

Transporting the Power Tool

WARNING

Always switch off the engine before

taking the machine off your back and

putting it down. When transporting it in a

vehicle, properly secure it to prevent

turnover, fuel spillage and damage to

the unit.

Fuel

Your STIHL power tool uses an oil-

gasoline mixture for fuel (see the

chapter on "Fuel” of your instruction

manual).

WARNING

Fueling Instructions

WARNING

To reduce the risk of serious injury from

burns, never attempt to refuel the unit

until it has been completely removed

from the operator.

WARNING

Fuel your power tool in well-ventilated

areas, outdoors. Always shut off the

engine and allow it to cool before

refueling. Gasoline vapor pressure may

build up inside the fuel tank depending

on the fuel used, the weather conditions

and the tank venting system.

In order to reduce the risk of burns and

other personal injury from escaping gas

vapor and fumes, remove the fuel filler

cap on your power tool carefully so as to

allow any pressure build-up in the tank

to release slowly. Never remove the fuel

filler cap while the engine is running.

Select bare ground for fueling and move

at least 10feet (3 m) from the fueling

spot before starting the engine. Wipe off

any spilled fuel before starting your

machine.

Gasoline is an extremely

flammable fuel. If spilled

and ignited by a spark or

other ignition source, it

can cause fire and seri-

ous burn injury or

property damage. Use

extreme caution when

handling gasoline or fuel

mix. Do not smoke or

bring any fire or flame

near the fuel or the power

tool. Note that combus-

tible fuel vapor may

escape from the fuel

system.

Stihl BR 800 Руководство по эксплуатации онлайн [7/80] 779239

Содержание

Похожие устройства