Home
Главная
Hitachi
Портативная мойка
AW150
Руководство по эксплуатации Страница: 19

Hitachi AW150 [19/140] English

English

USING DIFFERENT NOZZLES

Variable nozzle (with pressure adjustor) (Fig. 11)

The variable nozzle (with pressure adjustor) can be used

to alternation between “Jet” and “Spray” and between

“High Pressure” and “Low Pressure”.

Rotate the end on the nozzle clockwise for “Jet”, and

counter-clockwise for “Spray”.

Also, rotate the pressure adjuster clockwise for “Low

Pressure”, and counter-clockwise for “High Pressure”.

• Jet washer

A water jet is discharged in a direct line to remove

stubborn mud and other dirt from agricultural machinery,

etc.

• Spray washer

The water is discharged in a wide fan for cleaning walls,

motorbikes and automobiles, etc.

The entire nozzle can be rotated by approximately 90

degrees to change the shape of the spray between

horizontal and vertical.

NOTE

○ The pressure adjuster will also be rotated when

alternating between “Jet” and “Spray”, so readjust this to

the required setting after making the adjustment.

○ Set the spray adjustment to “Jet” ﬁ rst of all, and then

gradually move it to the “Spray” position while pulling the

trigger.

Note that there is a chance of the water being sprayed

horizontally over a wide area if this is rotated fully to the

“Spray” position.

○ Note that the nozzle may be damaged if it is forced to

move past the stop position when alternating between

“Jet” and “Spray”.

Turbo nozzle

The turbo nozzle rotates as it sprays high-pressure jets of

water for eﬃ cient washing.

NOTE

The turbo nozzle only discharges powerful jets of water

when set at the “Jet” mode.

Avoid using this on items that are easily broken or for

which coatings are easily peeled.

USING THE DETERGENT BOTTLE (Fig. 12)

Sprays water mixed with detergent.

Uses neutral detergents available on the open market.

WARNING

Do not use acidic or alkali detergents. Use only neutral

detergents available on the open market.

Using detergents other than neutral detergents or

chemical agents may result in accidents or malfunctions.

NOTE

Check to make sure that the water feed pipe is ﬁ rmly

connected to the washer.

The detergent will not be mixed with the spray otherwise.

1 Remove the cap from the detergent bottle and pour the

detergent into it.

2 Make sure the ﬁ lter on the tip of the detergent bottle’s

water feed pipe is inserted into the liquid and then tighten

the cap ﬁ rmly.

NOTE

Only the “Low Pressure” setting can be used for variable

nozzles (with pressure adjustors) when using the

detergent bottle.

The detergent will not be sprayed if the “High Pressure”

setting on variable nozzles (with pressure adjustors) or

turbo nozzles are used.

3 Set the adjustor to “Low Pressure” when using variable

nozzles (with pressure adjustors.)

4 Water containing the detergent will be sprayed at low

pressure when the trigger on the trigger gun is pulled.

Cleaning the detergent bottle (Figs. 13 and 14)

1 Remove the detergent bottle’s water feed pipe from the

washer.

2 Push the detergent bottle from the bottom and withdraw it

from the top.

3 Wash the detergent bottle, water feed pipe and ﬁ lter with

water from the faucet.

4 When reattaching the bottle, hold it as shown in Fig. 14,

and then push the protrusion on the bottom in as far as it

will go.

5 Insert the water feed pipe into the washer and tighten the

cap while making sure dust or dirt does not enter.

USING THE STRAINER HOSE SET (sold

separately)

The separately-sold strainer hose set is equipped with a

function that will automatically suck water from a water tank,

etc., when attached to the AW150.

The maximum height of suction (lifting range) is

approximately 0.5 m.

Attach this correctly in accordance with conditions.

Suction height when the height of the water feed outlet

is lower than the maximum height of the suction hose:

From the maximum height of the suction hose to the

surface of the water.

Less than 50 cm

Water surface

Water

feed inlet

Maximum height of

the suction hose

Suction height when the height of the water feed

outlet is the same as the maximum height of the

suction hose: From the water feed outlet to the surface

of the water.

Less than 50 cm

Water surface

Water feed inlet

(maximum height of

the suction hose)

000BookAW150EEWE.indb19000BookAW150EEWE.indb19 2013/05/2916:02:432013/05/2916:02:43

Hitachi AW150 [19/140] English

Содержание

Похожие устройства