Lexicon PCM96 SUR-D Руководство по эксплуатации онлайн [31/64] 779817

sUbnet

A small network within a larger network. For example, a TCP/IP network

might be a subnet of a venue’s network, which could include computers

throughout the building, or a network might be divided into subnets. For

example, in a large installation, there may be one subnet per rack or room.

dhCP (dynaMiC host ConfigUration ProtoCol)

This is a protocol for automatically assigning IP addresses to devices on a

network. With dynamic (DHCP) addressing, a device might have a different

IP address every time it connects to the network. DHCP relies on a DHCP

server to assign and manage IP addresses.

aUto iP

If DHCP fails, the PCM96 Surround selects a number and looks for colli-

sions. If no collisions are found, the PCM96 Surround accepts that number.

If collisions are found, the PCM96 Surround randomly selects another num-

ber and tries again.

ConneCting the CoMPUter direCtly to the PCM96

sUrroUnd

Assumptions:

• Using OS-X 10.4 or later.

• Computer has a working Ethernet network adapter.

• You have administrative rights so that network settings can be changed if

necessary.

1. Connect the included Ethernet cable to both the PCM96 Surround and

the computer.

2. Apply power to the PCM96 Surround and wait for it to boot.

3. Open the standalone application.

setUP of a siMPle isolated ethernet network Using

dhCP

Assumptions:

• Using OS-X 10.4 or later.

• Computer has a working Ethernet network adapter.

• You have an Ethernet switch/router with DHCP capability and Ethernet

cables for each connection needed.

• You have administrative rights so that network settings can be changed if

needed.

• The Ethernet network consists of exactly one computer that will be used

to run the PCM96 Surround configuration software and one or more

PCM96 Surround units.

1. Connect the computer and any PCM96 Surround to the switch hub

using normal Ethernet cables.

2. Apply power to all PCM96 Surrounds and wait for them to boot.

3. With DHCP enabled, the Ethernet switch/router should assign an IP

address to each of the devices including your computer.

4. The PCM96 Surround units should come up in the main window.