Lexicon PCM96 SUR-D [37/64] Machine menu

MaChine MenU

The Machine menu lets you adjust settings for a single virtual machine. To

access the Machine menu, press the Select knob while a Machine Preset is

loaded.

The sub-menus vary depending on what algorithm is active.

soft row setUP

This sub-menu lets you assign parameters to a Machine Preset’s soft row. The

soft row is the list of parameters that appears below a Machine Preset’s name

in the Preset screen. You can easily adjust these parameters with the A, B,

and C knobs (press Knob A to see more parameters in the soft row).

i/o settings

Here you can adjust the following settings (depending on the selected pre-

set):

Wet Dry Mix

Adjusts the proportion of wet (processed) signal to dry (unprocessed) signal.

Ranges from 0% (all dry) to 100% (all wet). In almost all cases you will

leave this at 100%, and control levels on your mixer.

Input Level

Controls the amount of signal admitted into the process from the input.

Ranges from 0.0dB INV to –90.0dB INV or OFF INV, and from –90.0dB

or OFF to 0.0dB.

Output Level

Controls the amount of post-mix signal emitted onto the output. Ranges

from –90.0dB or OFF to 0.0dB.

VarioUs ParaMeters

The sub-menus that appear below the I/O Settings sub-menu depend on the

active algorithm. Refer to the Parameters section on page 43 for more infor-

mation.

Using Midi

The MIDI Control menu is where all MIDI related control is changed. See

page 29 for information about the MIDI Control menu.

MIDI in the PCM Device series can be se tup in two basic configurations.

Setup #1 – More Devices

This setup is designed for the user who will:

• Use the PCM System Presets (User or Default) only for either a live or

studio setup

• Control more than 3 PCM Devices on the same MIDI Port

Setup #2 – More Control

This setup is designed for the user who:

• wants to be able to control every aspect of MIDI on the PCM Device

• Only has 1 to 3 PCM Devices