Lexicon PCM96 SUR-D Руководство по эксплуатации онлайн [36/64] 779817

Base Channel

Select the connected MIDI device’s base channel here. Choose from 0-15.

Bank Dump

Lets you copy an entire bank of presets from the PCM96 Surround to

another device via MIDI. (For a map of banks and presets, see page 34;

to see the current preset’s bank number, press Knob C while viewing the

Preset screen.) When Bank Dump is highlighted, turn the corresponding B

or C Knob to select a bank. Press the corresponding B or C Knob to send

the bank to the connected device.

teMPo Control

The Tempo Control sub-menu contains the following options:

Tempo Value

Set the current preset’s tempo here by turning Knob A, or by pressing the

Tap Tempo button at least two times.

Tempo Beat

Tempo is expressed in BPM. This control allows you to specify the value

of the beat. Eighth, quarter, and half note values are available. If, for exam-

ple, the rate is 120 BPM, and you select eighth-note here, the tempo will

be 120 eighth-notes per minute. If you select quarter-note here, the tempo

will be 120 quarter-notes per minute. (The factory default is quarter-note.)

Tempo Source

Select INTERNAL to determine the tempo using parameters within the

PCM96 Surround, or MIDI to set the tempo using MIDI beat clock.

Refer to your DAW’s manual to learn how to transmit this value.

Card Config

The Compact Flash Setup sub-menu indicates whether a Compact Flash card

is INSERTED or NOT INSERTED, and gives you the options to Format

(erase) the inserted card by pressing Knob B, or initializing the inserted card

by pressing Knob C.

network Config

Here you can set the PCM96 Surround Subnet Mask, IP Address, Gateway,

and DHCP information. Turn the Select knob to select a three-digit num-

ber (of the DHCP value) and turn Knob A to change the number (or the

DHCP value). See the Networking section on page 24 for more details.

hiQnet Config

Set the HiQnet Negotiation Mode (Static, Random, or Sequential) and

Node Address here. Turn the Select knob to underscore a value and turn

Knob A to change the value.

restore faCtory defaUlts

Returns the PCM96 Surround to its original state as shipped from the fac-

tory.