Dreame Bot Robot Vacuum and Mop D10 Plus (RLS3D) [8/111] Connect with dreamehome or mi home xiaomi home app

Dreame Bot Robot Vacuum and Mop D10 Plus (RLS3D) [8/111] Connect with dreamehome or mi home xiaomi home app
10 11
ENEN
1. Remove the protective strips 3. Connect to a power outlet and start charging
2.
Install the side brush
Click
Within the Good
Wi-Fi Range
Put away the power cord
into the cord storage slot
Preparation Before Use
Note:
• Keep the immediate area 1.5 m in front of the base and 0.5 m to its both sides
clear of objects.
• Make sure that no objects might block the signaling area.
Note: Install the side brush until it clicks into place.
Place the base on level ground against the wall and connect it to a power
outlet. Place the robot onto the base to charge. The robot will turn on
automatically and begin charging. It is recommended to fully charge your
robot before rst-time use.
About the Auto-Empty Base
It is recommended that the robot set out from the base before cleaning. Do not
move the base while the robot is cleaning. This ensures that the robot returns to
base smoothly.
After the robot completes the cleaning task and automatically returns to the
base, the base will start auto-empty. More settings can be operated on the APP.
Mi Home/Xiaomi Home APP: Open the Mi Home/Xiaomi Home app, tap "
" in the upper right, and scan the QR code above again to add "Dreame Bot
D10 Plus". Please follow the prompts to nish the Wi-Fi connection.
Dreamehome APP: Open the Dreamehome app, tap " " in the upper right
to go to the "Add Device" page, and then select "Dreame Bot D10 Plus".
Please follow the prompts to nish the Wi-Fi connection.
This product works with the Dreamehome or Mi Home/Xiaomi Home app,
which can be used to control your device.
Connect with Dreamehome or Mi Home/Xiaomi Home App
1.Download the Dreamehome or Mi Home/Xiaomi
Home App
Scan the QR code on the robot, or search“Dreamehome", "Mi Home" or "Xiaomi
Home" in the app store to download and install the app based on your needs.
Under the Cover
2.Add Device
Note:
• Only 2.4GHz Wi-Fi is supported.
• The version of the app might have been updated, please follow the instructions
based on the latest app version.
3. Reset Wi-Fi
Simultaneously press and hold the buttons and until you hear a voice
prompt saying, “Waiting for the network conguration.” Once the Wi-Fi
indicator is blinking slowly, the Wi-Fi has been successfully reset.
Note: If your robot cannot connect to the app successfully, reset the Wi-Fi and
add the device again.
Wi-Fi Indicator
·Blinking slowly: To be connected
·Blinking quickly: Connecting
·On: Wi-Fi connected
> 0.3 m
> 0.5 m
> 0.5 m
> 1.5 m

Содержание

Скачать