Vitek Safari VT-8248 [6/40] English

ENGLISH

• When the unit is switched on (the switch (2) is in the

position «1», «2», «3»), the indicator (3) lights up; when

the unit is switched off, the indicator (3) goes out.

Note: During the first operation some foreign smell and a

small amount of smoke from the heating element is pos-

sible, it is normal.

•

After the hot air brush operation is finished, switch it

off by setting the switch (2) to the «0» position and

unplug it.

• Wait till the hot air brush cools down.

• To remove the attachment, press the attachment release

button (1) and turn the attachment counterclockwise.

Overheating protection

Overheating protection switches the hot air brush off if

the outgoing air is too hot. If the hot air brush is switched

off during operation, set the switch (2) to the «0» position,

unplug the unit and make sure that the inlets and outlets

are unblocked. Let the unit cool down for 5-10 minutes and

switch it on again. Do not block the air inlets during unit

operation and avoid getting of hair into its air inlet.

CLEANING AND CARE

The нot air brush is intended for household use only.

• Set the switch (2) to the «0» position, disconnect the hot

air brush from the mains and let it cool down.

• To remove the attachment, press the attachment release

button (1) and turn the attachment counterclockwise.

• Wipe the unit body (4) with a damp cloth and then wipe

it dry.

• Clean the air inlet grid (5) with a brush.

• Never immerse the unit into water or other liquids.

• Do not use abrasives and solvents to clean the unit body.

STORAGE

• Disconnect the unit from the mains and clean it.

• Never wind the power cord around the hot air brush,

as this can damage the cord or the unit body. Handle

the power cord with care, do not pull, twist or stretch it,

especially near the power plug or at the junction point.

Straighten the cord periodically if it gets twisted during

the hot air brush operation.

• Keep the unit away from children in a dry cool place.