Vitek VT-2350 [4/28] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Vitek VT-2350 [4/28] English

Vitek VT-2350 [4/28] English
4
ENGLISH
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY. ITS COMMERCIAL USAGE AND USAGE
IN PRODUCTION AREAS AND WORK SPACES IS
PROHIBITED.
BEFORE THE FIRST USE
After unit transportation or storage at low tem-
perature keep it for at least three hours at room
temperature before switching on.
There may be water spots in the air humidifier, this
is normal, as the unit has undergone factory qual-
ity control.
– Unpack the unit, remove any stickers and pack-
age materials that can prevent unit operation.
Check the unit for damages. In case of damages
do not switch the unit on.
– Remove the water tank (4) and remove a trans-
porting plastic part.
– Before plugging the unit in make sure that your
home mains voltage corresponds to the unit
operating voltage.
– The unit is intended for operation with AC system
and 50 or 60 Hz frequency. The unit does not
need any additional settings for operating with
the required nominal frequency.
Notes:
– Use the air humidifier at the room temperature
from +10° С to +40°С, and relative humidity less
than 80%.
– Water temperature should not exceed +40°С.
AIR HUMIDIFIER OPERATION
•
Take the «mist» release nozzle (1, 2) and remove
the lid (3) from the water tank (4).
•
Remove the water tank (4) from the motor unit (8).
•
Fill the water tank (4) with the necessary amount
of water.
Note: - it is recommended to use water that was
additionally cleaned with domestic filter.
•
Place filled water tank (4) on the motor unit (8).
•
Cover the water tank (4) with the lid (3).
•
Insert the power plug into the mains socket.
Notes:
– the operation mode selection and setting but-
tons are sensory, you just need to touch the but-
ton to switch the necessary operation mode on,
every touch of the active button is accompanied
by a sound signal.
•
Switch on the humidifier by pressing the on / off
button (11), a beep will sound and the LED
display (9) will show a string of symbols (15) and
symbols (16, 17, 18, 19).
•
During operation of the humidifier, the dis-
play alternates between showing of the cur-
rent temperature and the relative humidity in
the room (15).
•
To select the intensity of the «mist» output, suc-
cessively press the button (12) on the control
panel (10). The intensity mode will be shown on
the LED display by symbols (16). There are three
intensity modes available:
«Low» - digit «1» is displayed;
«Medium» - digit «2» is displayed;
«High» - digit «3» is displayed.
•
To select the mode for setting the relative
humidity in the room (hydrostatic function), con-
sequently press the button (13). You can set the
desired level of relative humidity in the room in
the range from 45% to 90% with the step of 5%,
the level of humidity is indicated on the LED dis-
play by symbols (18).
•
To turn on the night illumination / sleep mode,
consequently press the button (14):
– first pressing - switching on the night illu-
mination mode, alternating automatic color
change of seven colors;
– second pressing - fixation of the selected
color of the night illumination;
– from 3 to 9 pressings - selection of the desired
color of the night illumination in a fixed mode;
– 10 pressings - switching off the night illumi-
nation;
– pressing and holding the button (14) for more
than 3 seconds - turning on / off the sleep
mode, while the middle «2» mode of mist out-
put intensity is turned on.
•
The «Timer» function allows you to set the timer
operation time in the range from 1 to 8 hours
(with the step of 1/2/4/8 h.) - this function is
available only through the TuyaSmart mobile
application.
A detailed description of controlling the humidi-
fier through TuyaSmart is provided in the additional
instructions for using the TuyaSmart APP program.
•
When the water in the tank (4) is empty, the
insufficient water symbol on the display (9) will
light up red .
•
Switch off the humidifier by pressing the on / off
button (11), all symbols on the display (9)
will go out. Unplug the unit. Fill the tank (4) with
water, install it in its place and switch the unit on.
•
At the end of the work, turn off the humidifier
by pressing the on / off button (11), unplug
the unit.
CLEANING AND CARE
WARNING! Always switch the air humidifier off and
unplug it before maintenance works or cleaning.
Water filter
•
Installed ceramic water filter (6) is permanent
and doesn’t have to be replaced. Every 3-5 days

Содержание

Похожие устройства

Скачать