KRAFT Technology TCH-HDD8597SDB [46/84] Troubleshooting

KRAFT Technology TCH-HDD8597SDB [46/84] Troubleshooting
46
USER GUIDE
AUTOMATIC WASHING MACHINE
WATER SUPPLY FILTERS CLEANING
Turn off the tap, disconnect the hose from the tap,
and clean the filter screen with a small brush.
Disconnect the water supply hose from the washing
machine, pull out the filter screen with pliers, and
install it back after cleaning.
Connect the filling hose, open the tap, and make sure
there is no water leakage.
TECHNICAL MAINTENANCE
All electronic components (plug, electric cord, com-
pressor, etc.) must only be re-installed in certified service centers by qualified personnel.
In the event of a malfunction, you should always contact an authorized service cent-
er, specifying the type of problem and the model of your washing machine. Unqualified
repair removes the device from warranty service. Only original spare parts can be used
to repair the device.ли.
TROUBLESHOOTING
During operation, if any malfunctions are detected that the consumer cannot elimi-
nate on their own, it is necessary to contact the service center for the repair of washing
machines.
But before contacting the repair service, read this section. This list includes the most
common cases that are not the result of poor assembly quality or poor-quality materials
used in this device.
ATTENTION! Before troubleshooting, you must disconnect the product from
the mains. Troubleshooting that is not described in this manual should only be
carried out by a qualied electrician or a competent technician.
Malfunction Troubleshooting method
Washing machine doesn't turn on.
Connect the machine to the mains. Press the "On/Off" button, then the
"Start/Pause" button. Spread out the water supply hose.
Washing machine does not work.
Open the tap until it stops. Clean the filter on the water supply hose. Close
the washing machine door.
The loading hatch does not open
after washing.
The hatch lock locking system is enabled. Disconnect the washing
machine from the power supply.
The water does not heat up.
Make sure that the cold-water wash mode is not selected.
The heating element is damaged. Contact the service center.
Water under the washing machine. Check the connection of the water supply hose.
The indicators are not highlighted.
Power supply is disrupted. Check the power connection.
The control board is damaged. Contact the service center.
Bad / weak spin.
Dose detergent according to the degree of soiling and water hardness
(see recommendations on the detergent pack). Clean the pump filter.
1 2
3 4

Содержание

Похожие устройства

Скачать