Karcher NT 50/1 Tact Te L [21/264] Exchanging the flat pleated filter
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Karcher NT 50/1 Tact Te L [21/264] Exchanging the flat pleated filter

Karcher NT 40/1 Tact Te L 1.148-311.0 [21/264] Exchanging the flat pleated filter
– 6
DANGER
First pull out the plug from the mains before
carrying out any tasks on the machine.
Dust extracting machines are safeguards
for the prevention or elimination of hazards
defined in the regulations of BGV A1.
– In order to carry out maintenance work,
the user must disassemble, clean and
service the unit, in so far as this is pos-
sible without endangering maintenance
personnel and other persons. Suitable
precautions include decontamination
before the unit is disassembled. Pre-
cautions must be taken for local filtered
forced air ventilation at the place where
the unit is disassembled, the cleaning of
the maintenance surface and suitable
protection of the personnel.
– The outside of the unit should be
cleaned thoroughly and any harmful
substances removed. Alternatively, a
sealed coating may be applied before
the unit is removed from the danger ar-
ea. All unit parts are to be considered
contaminated when they are removed
from the danger area. To avoid distribu-
tion of the dust, you must take the ap-
propriate measures.
– In the framework of maintenance and
repair work all contaminated objects
that cannot be cleaned satisfactorily
must be disposed of. Such objects must
be disposed of in impermeable bags in
accordance with the valid provisions for
the disposal of such waste.
몇 WARNING
Safety equipment for preventing hazards
must be serviced and maintained regularly.
This means that the manufacturer's staff or
persons trained by the manufacturer must
check the equipment for proper functioning
at least once a year, i.e. check for leaks, fil-
ter damage, etc.
ATTENTION
Risk of damage! Do not use detergents
containing silicone to clean.
– No outside help is required for carrying
out basic maintenance and cleaning.
– The appliance surface and the inside of
the container should be cleaned regu-
larly using a damp cloth.
DANGER
Risk due to dust hazardous to health. Al-
ways use disposal clothing and P2 or high-
er breath-safe masks while carrying out
maintenance tasks (such as changing fil-
ters).
Illustration
Open filter door.
Remove filter frame.
Replace the flat pleated filter.
During placement, make sure that the
flat fold filter rests against all sides.
Dispose of the used flat-folded filter ac-
cording to the statutory provisions.
Insert filter frame.
Close the filter door, it must lock into
place.
Illustration
Release and remove the suction head.
Pull out the fleece filter bag on the
flange towards the top.
Tightly close the fleece filter bag with
lock cap.
Dispose of the fleece filter bag accord-
ing to the local provisions.
Insert the new fleece filter bag.
Insert and lock the suction head.
Illustration
Release and remove the suction head.
Put the disposal bag over.
Tightly close the disposal bag with ca-
ble tie underneath the opening.
Remove disposal bag.
Dispose of the disposal bag according
to the local provisions.
Insert the new disposal bag.
Care and maintenance
Exchanging the flat pleated filter
Exchange the fleece filter bag
Replace the disposal bag
21EN

Содержание

Похожие устройства

Скачать