Rondell 1109 Руководство по эксплуатации онлайн [19/40] 796763
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Rondell 1109 Руководство по эксплуатации онлайн [19/40] 796763

Rondell 1109 Руководство по эксплуатации онлайн [19/40] 796763
19
–
When the above processes are completed, the machine
will be ready for use.
–
To switch the coffee machine off and put it into standby
mode, press and hold the button (22) « » for 4 seconds,
which will start the washing mode.
–
Disconnect the unit from the mains.
MAKING «ESPRESSO»
Notes: Warm the cups that you want to use first; to do this,
place the cups on the cup warming tray (15), while water is
heated in the boiler, the tray (15) heats up too, thus warm-
ing the cups.
–
Set the temperature of the ready beverage to your pref-
erence, see «Changing the beverage settings». You can
select the water temperature from 75 to 95°C. The default
setting is 85°C.
–
Place a cup under the adjustable coffee spout (2) of the
coffee machine and adjust its height (fig. 4).
–
Press «Espresso» button (19) « » to make the bev-
erage.
–
The preparation process will end automatically when
the coffee machine has made the programmed amount
of drink.
–
Press «Exit» button (21) « » to pause the process of
making coffee.
–
After finishing the process of making a drink, take the
cup with the drink away .
–
Press «Two cups» button (22) « » to make two cups of
coffee. The symbol «Ð2» will appear on the display (17).
Changing settings while making a drink
–
To change the coffee strength, while grinding the coffee
beans, press the buttons (18) « » or (20) « » (pic. 5)
to change the amount of ground coffee (9-11 g) that will
be used to make the beverage. At the same time the dis-
play will show the process of changing the correspond-
ing setting (pic. 6).
–
To change the amount of ready beverage, use the but-
tons (18) « » and (20) « » (pic. 5) to change the water
volume (20-250 ml) when the coffee machine starts to
release water into the cup. At the same time the display
will show the process of changing the corresponding
setting (pic. 7).
MAKING «AMERICANO»
–
Place a cup under the coffee spout (2) of the coffee
machine and adjust its height (pic. 4).
–
Press «Americano» button (18) « » to make the bev-
erage.
–
Press «Exit» button (21) « » to pause the process of
making coffee.
–
After the end of the cooking process, take away the cup
with the beverage.
–
Press «Two cups» button (22) « » to make two cups of
coffee. The symbol «Ð2» will appear on the display (17).
Changing settings while making a drink
•
To change the coffee strength, while grinding the coffee
beans, press the buttons (18) « » or (20) « » (pic. 5)
to change the amount of ground coffee (9-11 g) that will
be used to make the beverage. At the same time the dis-
play will show the process of changing the correspond-
ing setting (pic. 8).
•
To change the amount of «Espresso», use the buttons
(18) « » and (20) « » (pic. 5) to change the water
volume (20-250 ml) when the coffee machine starts to
release water into the cup. At the same time the display
will show the process of changing the corresponding
setting (pic. 9).
•
To change the amount of hot water, use the buttons (18)
« » and (20) « » (pic. 5) to change the water volume
(20-250 ml) when the coffee machine starts to release
water into the cup. At the same time the display will
show the process of changing the corresponding set-
ting (pic. 10).
MAKING «FROTHED MILK»
ATTENTION! Be careful not to get burns by the outgoing
steam from the cappuccinator pipe (3).
–
Put the cappuccinator pipe (3) into the cup with milk
(pic. 11).
–
Press the button (23) « » to froth milk (pic. 12).
Changing settings while making a drink
•
To change the milk foam making time, use the buttons
(18) « » or (20) « » (pic. 5) to change the time. At the
same time the display will show the process of changing
the corresponding setting (pic. 13).
IMPORTANT:
It is important that milk for making foam is fresh, chilled
and without additives, that is, not so-called long-term stor-
age milk.
Use regular full-cream milk with fat content from 4% to 6%,
the cream fat content should be not less than 10%.

Содержание

Похожие устройства

Скачать