Rondell 1109 [21/40] Pic 27 29
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Rondell 1109 [21/40] Pic 27 29

Rondell 1109 [21/40] Pic 27 29
21
–
Install the cappuccinator pipe (3) back to its place.
Notes: It is recommended to wash the milk frothing system
after every use.
Cleaning the brewing unit
–
Open the brewing unit door (11) (pic. 22).
–
Remove the container (13) (pic. 23).
–
Remove the brewing unit (12) from the coffee machine
(pic. 24).
–
Soak the brewing unit (12) in a container with clean water
and rinse it thoroughly or wash it under running water.
–
Place the brewing unit (12) in the coffee machine slot,
then install the brewing grounds container (13).
Notes: We recommend cleaning the brewing unit once a
month.
Cleaning from scale (decalcification)
To prolong the life of the coffee machine, it is critical to
clean the unit from scale in a timely manner. The descaling
frequency depends on water hardness in your region. To
determine the level, we recommend using paper indicator
testers that are immersed in water and change color de-
pending on the amount of calcium, magnesium and iron.
Based on the data obtained, it is necessary to choose one
of the following decalcification frequency schemes:
Level Water hardness,
mg/l
Descale after
(number of cups)
Level 1 0-50 880
Level 2 51-120 440
Level 3 151-250 280
Level 4 251-425 220
You can use calcium powder or tablets that are designed for
automatic coffee machines and other food and drink mak-
ing devices as a cleaning agent.
–
Make the descaling solution according to the cleaning
agent instructions.
–
Fill the water tank (4) with the prepared solution up to
the maximum mark and place it in the coffee machine
(fig. 25).
–
Place a suitable container (at least 1.5 l) under the cof-
fee spout (2).
– Press and hold the button (21) « » for 4 seconds
until the «Rinse» symbol appears on the display
(pic. 26).
–
Press «Enter» button (23) to start the cleaning process.
–
When the water system has been cleaned with the des-
caling solution, you will hear a sound signal and the sym-
bol « » will appear on the display.
–
Remove the water tank (4) from the coffee machine,
wash it and fill it with clean water.
–
Insert the water tank (4) into the coffee machine and wait
for the cleaning process to finish.
–
To reset the number of drinks you have made, perform
a factory reset, see «Changing the coffee machine set-
tings».
Cleaning the coffee grinder
–
Unplug the unit
–
Open the coffee bean container lid (10) and clean the
inside surface with a dry, soft cloth (pic. 30).
ATTENTION! Do not use water or sharp objects to clean
the coffee grinder.
Replacing sealing rings
The delivery set includes a set of sealing rings for the heat-
ing block.
Rings must be replaced if they are worn or damaged.
ATTENTION! Replacement should be carried out when the
unit is unplugged.
–
Open the brewing unit door (11) (pic. 22).
–
Remove the used coffee grounds container (13) (fig. 23).
–
Remove the brewing unit (12) (fig. 24).
–
Clean the brewing unit by immersing it in a container with
clean water for 30-40 minutes.
– Replace the ring gaskets on the brewing unit
(pic. 27-29).
Troubleshooting
Problem Possible reason Solution
The coffee machine does not
switch on
The unit is unplugged from
the mains
Plug the coffee machine into the mains
The unit is in sleep mode Touch the ON button on the front panel

Содержание

Похожие устройства

Скачать