Home
Главная
Crown
Болгарки (УШМ)
CT13507-150N
Руководство по эксплуатации Страница: 20

Crown CT13507-150N [20/156] Symbols used in the manual

English

point of operation, is moving away from your body, the

possible kickback may propel the spinning wheel and

the power tool directly at you�

• When wheel is binding or when interrupting a cut

for any reason, switch off the power tool and hold

the power tool motionless until the wheel comes

to a complete stop. Never attempt to remove the

cut-off wheel from the cut while the wheel is in

motion otherwise kickback may occur. Investigate

and take corrective action to eliminate the cause of

wheel binding�

• If the power supply suddenly cuts during operation,

immediately move on / off switch into off in order to

prevent accidental starting of the power tool�

• Slow the rotation of the accessories caused by

inertia down with the help of spindle lock or applying

force to the side surface of discs is strictly forbidden�

Using spindle lock for this purpose will put the power

tool out of operation and void the warranty�

Warning: the chemical substances

contained in dust generated in sanding,

cutting, sawing, grinding, drilling and

other construction industry activities

may result in cancer, congenital deciency or be

harmful to the fertility. The ion of some chemical

substances shall be:

• Before any repair and replacement work to the

machine, the power plug must be pulled out rstly.

• The transparent two silicon oxide and other masonry

products in the wall bricks and cement; the chromium

arsenic (CCA) in wood with chemical treatment� The

harm degree of these substances shall depend on

the frequent degree of you carrying out these works�

If you want to reduce the contact with these chemical

substances, please work in the place with ventilation

and you shall use the appliances with safety certicates

(such as the dust mask designed with tiny dust lter).

Notice the power voltage: in power connection, you

must conrm that if the power voltage is the same

to the voltage marked in the tool's data plate� If the

power voltage is higher than the appropriate voltage,

the accidents will be resulted to the operators, and at

the same time, the tool will be destroyed� Therefore, if

the power voltage has not been conrmed, then you

shall never plug in arbitrarily� On the contrary, when

the power voltage is lower than the required voltage,

the motor will be damaged�

Symbols used in the manual

Following symbols are used in the operation manual,

please remember their meanings� Correct interpreta-

tion of the symbols will allow correct and safe use of

the power tool�

Symbol Meaning

Angle grinder

Sections marked gray - soft

grip (with insulated surface)�

Symbol Meaning

Serial number sticker:

CT �� - model;

XX - date of manufacture;

XXXXXXX - serial number�

Possibility to select between

three positions of additional

handle�

Read all safety regulations

and instructions�

Wear safety goggles�

Wear ear protectors�

Wear a dust mask�

Disconnect the power tool

from the mains before instal-

lation or adjustment�

Movement direction�

Rotation direction�

Locked�

Unlocked�

Prohibited�

Double insulation / protec-

tion class�

A sign certifying that the

product complies with es-

sential requirements of the

EU directives and harmo-

nized EU standards�

Crown CT13507-150N [20/156] Symbols used in the manual

Содержание

Похожие устройства