Rondell RDE-1107 Руководство по эксплуатации онлайн [19/36] 799185

Rondell RDE-1107 Руководство по эксплуатации онлайн [19/36] 799185
19
Malfunction Possible reason Solution
The coffee grinder is
making odd noises
The coffee grinder is clogged Clean the coffee grinder according to this guide
There are foreign objects caught
up in the coffee grinder
Unplug the coffee maker, remove foreign objects from
the coffee grinder and wipe it with a dry cloth.
The coffee grinder
doesn’t work
The coffee grinder motor has
broken
Contact the service center
There are foreign objects caught
up in the coffee grinder
Unplug the coffee maker, remove foreign objects from
the coffee grinder and wipe it with a dry cloth.
Liquid is slowly leaking
from the coffee spout
The grind is too fine Adjust the grinding by setting it to less fine grind
The brewing unit is clogged up Clean the brewing unit following the guide
Instead of coffee water
drips from the coffee
supply block
Coffee beans are not sufficiently
ground
Adjust the coffee grinder settings to «+»
Coffee beans are wet Replace the coffee beans with well-dried ones
The coffee machine dis-
plays a notification that
there is no brewing unit
although it is installed in
the machine body
The brewing unit has been
inserted incorrectly
Check the brewing unit and reinsert it in accordance
with this guide
The coffee spout pro-
duces too little coffee
The water supply system is
clogged with the residual scales
Descale the coffee machine in accordance with this
guide
The milk is not frothing The milk frother is clogged Fully clean the milk system and milk tubes.
The milk frother has been
installed incorrectly
Check the milk frother and reinstall it in accordance
with this guide
The frothed milk control knob
(15) is set to the position «Hot
milk»
Turn the control knob (15) counterclockwise to the
position «Frothed milk»
The milk is not frothing This type of milk is not suitable
for frothing
For best results, use whole milk
Milk is not flowing into
the frothing and supply
system
The frothing and supply system
is blocked
Clean the frothing and supply system fully following
this guide
The milk supply pipe is installed
improperly
Re-check the installation of the milk supply pipe, it
must be tightly fitted to the inlet of the milk system
The coffee maker display
shows the message that
the used coffee grounds
container is not installed,
though it is installed to
its place
The coffee grounds container
sensor is blocked
Remove the used coffee grounds container and
thoroughly clean all corners of the container area
with the soft brush supplied with the unit, and clean
all outer corners of the container with a dry cloth.
The display shows the
icon «Water tank»
The water tank is empty Fill the water tank with clean water and install it into
the socket behind the left door of the coffee maker
and press until clicking

Содержание

Похожие устройства