Kuppersberg GIM 6078 [70/160] About the safety supply hose

Kuppersberg GIM 6078 [70/160] About the safety supply hose
70
TECHNICAL PASSPORT ENGLISH
Dishwasher
WATER SUPPLY AND DRAIN
Cold water connection
Connect the cold water supply hose
to a threaded 3/4 (inch) connector and
make sure that it is fastened tightly in
place.
If the water pipes are new or have
not been used for an extended period
of time, let the water run to make sure
that the water is clear. This precaution
is needed to avoid the risk of the water
inlet to be blocked and damage the
appliance.
About the safety supply hose
The safety supply hose consists of
the double walls. The hoses system
guarantees its intervention by blocking
the ow of water in case of the supply
hose breaking and when the air space
between the supply hose itself and the
outer corrugated hose is full of water.
safety supply hoseordinary supply hose
WARNING
A hose that attaches to a tap can
burst if it is installed on the same water
line as the dishwasher. If your sink has
one, it is recommended that the hose be
disconnected and the hole plugged.
How to connect the safety supply
hose
1. Pull the safety supply
hoses completely out from storage
compartment located at rear of
dishwasher.
2. Tighten the screws of the safety
supply hose to the faucet with thread
3/4inch.
3. Turn the water fully on before
starting the dishwasher.
How to disconnect the safety supply
hose
1. Turn off the water.
2. Unscrew the safety supply hose
from the faucet.

Содержание

Похожие устройства

Скачать