Scarlett SC-HC63C103 [5/12] Wipe the clipper with a dry soft cloth

Scarlett SC-HC63C103 [5/12] Wipe the clipper with a dry soft cloth
IM023
www.scarlett.ru SC-HC63C103
5
Make sure the appliance is switched off during charging, in order to avoid damaging the
surrounding area and other objects.
When charging for the first time, leave the clipper to charge continuously for 15 hours.
Subsequent charges will reduce times.
Once the clipper is completely charged, discharge it through normal use. Then recharge to full
capacity. Maximum battery capacity will only be reached after several
charging/discharging cycles.
Discharge the battery completely twice a year by letting the motor run until it stops. Then fully
recharge the battery.
The machine can be charged using the charging cord. Connect the USB input of the cord to
the USB port, and the other end to the connector for connecting the power cord on the device.
The red indicator on the bottom of the device will blink indicating the charging process
OPERATION
Hold detachable comb and carefully slide arms into corresponding grooves until click. Take
the detachable comb, put its front part on the blades and then press its back part until it clicks.
There are 4 detachable combs included in the delivery set - 3 mm, 6 mm, 9 mm, 12 mm
You may also use the clipper without the attachment (the length of the blades is 0.5 mm)
To turn on the machine, slide the power switch up («1» position).
At the end of the operation, turn off the machine by sliding the power switch down («0»
position).
REPLACEMENT OF THE COMB ATTACHMENT
Turn off the machine.
Turn the machine upside down.
To remove the comb from the cutting unit, carefully remove its back part from the device.
Then slide the comb from the cutting unit.
To attach the ocomb to the cutting block, slide the front part of the protection onto the teeth of
the cutting block. Then press down on the back part of the protection until it clicks.
REMINDERS
It is better to cut dry hair.
Comb hair carefully before cutting.
Always take off a little at a time.
For even cutting do not force the clipper. Also remember to comb the hair more frequently to
remove trimmed hair and check for uneven strands.
Cutting options are given in fig. 1.
BATTERY REMOVAL
The battery must be removed from the appliance before its disposal.
When removing the battery, the appliance must be disconnected from power supply.
CARE AND CLEANING
Turn off the clipper and disconnect it from power supply.
Remove the blades. For this purpose:
- hold the clipper with its logo upwards.
- press the blades up and they will be detached (make sure to perform it after the device is
turned off and unplugged)
Clean the blades and the clipper from hair with the help of a brush supplied (do not rinse the
parts with water)
Wipe the clipper with a dry soft cloth.
Put the blades on the unit. Make sure the blades are installed correctly
To ensure continuous and reliable operation of the clipper, oil the blades using special oil after
each haircut.
After oiling turn on the clipper to allow even distribution of oil between the blades and check
their smooth operation. Remove excessive oil.
Do not use hair oil, grease, oil mixed with kerosene or any solvent.
STORAGE
Keep the appliance in a dry place.
The blades must be oiled for storage period.

Содержание

Скачать