Home
Главная
Centek
Телевизор
CT-8585 Smart
Инструкция по эксплуатации Страница: 28

Centek CT-8585 Smart [28/52] Do not plug the tv into an outlet with power above the specified range before

- atmospheric pressure from 86 to 106 kPa (650 to 800 mm Hg)

2. ~ Means alternating current.

Means direct current.

Safety instructions

Read and save these instructions. Follow the instructions and follow all

warnings.

2. Do not use the appliance near water.

Do not close the ventilation. Do not cover the ventilation openings with objects

such as newspapers, tablecloths, curtains, etc.

Do not install near heat sources such as radiators, heaters, stoves or other

appliances (including amplifiers) that emit heat.

Do not use a power outlet that is damaged or does not fit the type. Make sure

that the plug and socket are properly connected. Protect the plug and socket

from dust and contact with metal objects.

Tell the children that it is dangerous to climb on furniture to get the TV remote

control.

If you use a mobile TV stand, then be careful when moving it to avoid injury from

tipping over. Unexpected stops, excessive efforts and uneven floor surface can

cause the product to fall off the stand.

For additional protection of the device during a thunderstorm or when it is

left unattended and not used for a long time, unplug it from the outlet and

disconnect the cable system.

For maintenance, contact qualified service personnel. If the power cord is

damaged, its replacement must be carried out by the manufacturer, service

department or qualified personnel to avoid danger.

The device is not intended for use by persons (including children) with reduced

physical, sensory or mental abilities or lack of life experience or knowledge,

unless they are supervised or instructed to use the device by a person

responsible for their safety.

Children should be supervised to prevent playing with the device.

NOTE:

Do not plug the TV into an outlet with power above the specified range. Before

connecting to an external device, please first make sure that the TV and the

external device have been disconnected. Before switching on, check that the

name and color of the plugs and connectors match.

Please, when disconnecting the power cord, hold on to the insulated part of the

plug, do not touch the metal part.

NOTE:

Disposal of this product must be carried out in accordance with local regulations.

Do not dispose of this product with general household waste disposal.

Sometimes, several inactive pixels can be displayed on the screen as a fixed

blue, green or red dot. Please note that this does not affect the performance

of your product.

Do not touch the screen, do not hold your fingers on it for a long period. This may

produce a temporary distortion effect on the screen.

It is not recommended to keep a real (static) image on the screen for a long time,

and also it is not necessary to make the image too bright: reduce the brightness

and contrast when the image is real (static).

2. SCOPE OF SUPPLY

- Television — 1 pc.

- Remote control unit (RC) — 1 pc.

- RC battery* — 2 pcs.

- Removable foot — 2 pcs.

- Set of screws for foot attachment — 1 pc.

- Set of rubber washers for feet* - 1 pc.

- User Manual — 1 pc.

*supplied optionally.

3. ASSEMBLY

Installing the Feet

1. Open the box and remove the TV and the feet.

2. Ensure that the television is turned off.

3. Remove protective film from the TV and the feet.

4. Lay the TV, with the screen down, on a soft surface to prevent damage.

5. Insert the feet into the sockets in the bottom of the TV.

6. Fasten the feet using all the screws included in the supply.

(optional) After fastening the feet to the TV housing insert the rubber washers

from the accessory set into the respective openings in the bottom part of the

feet.

Mounting the TV to a wall

1. Carefully lay the TV on a table covered with soft fabric to avoid scratches.

2. Use a screwdriver to remove the screws fastening the stand/feet. Remove the

stand/feet. Be careful to avoid damaging the parts.

Set up the wall mount so that it can be fastened to the wall as shown in

Figures 3 and 4.

Drill 4 holes in the wall (the scale is shown for reference) and screw in the

4 anchor bolts.

5. Use a screwdriver to screw in the bolts on the back side of the TV as shown in

Fig 4. Place the TV on the wall.

NOTE:

1. The TV wall mount complies with the VESA standard.

2. The use of the wall mount is optional.

3. There should be no other objects on or near the wall when mounting the TV.

4. The TV should be mounted to the wall by a skilled technician.

5. Observe the assembly instruction when mounting the TV.

6. The pictures are shown for reference.

Wall mount

Wall

Anchor bolt

Model CT-8585

Size without stand (mm) 1899х1087

Size with stand (mm) 1899х1180

A (mm) 1899

B (mm) 1180

C (mm) 1087

Centek CT-8585 Smart [28/52] Do not plug the tv into an outlet with power above the specified range before

Содержание

Похожие устройства