Kuppersberg WDM 560 Инструкция по эксплуатации онлайн [62/156] 810104

TECHNICAL PASSPORT ENGLISH

Washer Dryer

Â Connect the white capped end

of the water inlet hose to the white

water inlet valve on the rear side of

the machine and the red capped end of

the hose to the red water inlet valve (if

applicable).

Â Hand tighten the connections.

If in any doubt, consult a qualied

plumber.

Â Water ow with pressure of 0.

1-1 Mpa will allow your machine to

operate at optimum efciency (pressure

of 0. 1 Mpa means that more than

8 litres of water per minute will ow

through a fully opened tap).

3. Once you have made all of the

connections, carefully turn the water

supply on and check for leaks. 4. Ensure

that the new water inlet hoses are

not trapped, kinked, twisted, folded or

crushed.

Â If your machine has a hot water

inlet connection, the temperature of the

hot water supply should not be higher

than 70°C.

NOTE: Your Washing Machine

must only be connected to your water

supply using the supplied new ll hose.

Old hoses must not be reused.

3/4”

10 мм

~ 95 cm ~ 140 cm

~ 145 cm ~ 95 cm

0 – max. 100 cm

95 см

150 см