Kuppersberg WDM 560 [95/156] Automatic fault warnings and what to do

Kuppersberg WDM 560 [95/156] Automatic fault warnings and what to do
ENGLISH TECHNICAL PASSPORT
Washer Dryer
95
11. AUTOMATIC FAULT WARNINGS AND WHAT TO DO
 Your Washing Machine is equipped with a built-in fault detection system,
indicated by a combination of ashing wash operation lights. The most common failure
codes are shown below.
Excessive foam is
formed in the detergent
drawer.
Excessive amount of
detergent used.
Press the Start/Pause button. To stop
the foam, dilute one tablespoon of
softener into 1/2 litre of water and pour
into the detergent drawer. Press the
Start/Pause button after 5-10 mins.
Wrong detergent used. Only use detergents produced for
automatic Washing Machines.
Unsatisfactory washing
result.
Your washing is too dirty for
the programme selected.
Use the information in the programme
tables to select the most appropriate
programme.
Amount of detergent used
insufcient.
Use the amount of detergent as
instructed on the packaging.
There is too much laundry in
your machine.
Check that the maximum capacity for
the selected programme has not been
exceeded.
(*) See the chapter regarding maintenance and cleaning of your machine.
(**) See the chapter regarding installation of your machine.
TROUBLE
CODE
POSSIBLE FAULT WHAT TO DO
Er 01 The door of your machine is
not shut properly.
Shut the door properly until you hear
a click. If your machine persists to indicate
fault, turn off your machine, unplug it and
contact the nearest authorised service agent
immediately.
Er 02 The water pressure or the
water level inside the machine
may be low.
Check the tap is fully turned on. Mains water
may be cut-off. If the problem still continues,
your machine will stop after a while
automatically. Unplug the machine, turn off
your tap and contact the nearest authorised
service agent.
Er 03 The pump is faulty or pump
lter is clogged or electrical
connection of the pump is
faulty.
Clean the pump lter. If the problem persists,
contact the nearest authorised service agent.
(*)
Er 04 Your machine has excessive
amount of water.
Your machine will discharge water by itself.
Once the water has drained, turn off your
machine and unplug it. Turn off the tap and
contact the nearest authorised service agent.

Содержание

Похожие устройства

Скачать