Ada PROF SET LaserTANK 3-360 + Cosmo 50 + SILVER PLUS + LASERMARKER 70 + Laser STAFF для уличных работ А00735 PDF-инструкция онлайн [5/28] 818938

5English

REMOTE CONTROL

1. Side vertical (V) laser beam button

2. All laser lines On/Off button

3. Horizontal (H) laser line On/Off button

4. Front vertical (V) laser line button

LASER LINES

Laser lines scheme is shown in the picture

SAFETY INSTRUCTIONS

• Please follow up instructions given in operating manual.

• Do not stare into beam. Laser beam can lead to eye injury (even from

greater distances).

• The laser line should be set up so that the beam path is not at normal

eye level.

• Use the instrument for measuring jobs only.

•

Do not open instrument housing. Repairs should be carried out by

authorized workshops only. Please contact your local dealer.

• Do not remove warning labels or safety instructions.

• Keep instrument away from children.

• Do not use instrument in explosive environment.

PREPARATION BEFORE OPERATION

1. Check the battery power before operation: press button (9) near the battery

power indicator. The quantity of flashing bars shows the power level. All bars

are flashing when the battery is fully charged. If the bars do not flash or only

few bars are flashing, charge the battery or replace (if available) the battery.

2. To change the battery, press the latch on the bottom part of the battery

and gently pull the case to remove it. Place a fully charged battery instead of

the lower power battery. When installing, gently press down on the battery