Ada ULTRALINER 360 4V Green А00540 Инструкция к товару онлайн [5/24] 818940

5English

OPERATION

1. Open battery compartment cover. Insert 4 batteries with proper polarity

into the holder. Contacts of the holder (batteries) or Li-batteries must coincide

with contacts of the battery compartment. Close the battery cover.

2. Place the instrument on the tripod or floor. When using tripod, place the

instrument on the tripod and screw the centering screw into the center hole.

3. Switch On the instrument by rotating the switch (2) counterclockwise until

its clicking position. Green LED will flash. If the battery power is low, green

color of the indicator will be changed into red.

4. The instrument works in slope mode in the first position of the switch

(X). It is possible to project laser lines at any angle. In the position ON the

pendulum will be unlocked and laser lines will be automatically self-leveled.

5. If there is a sound signal and laser lines begin to blink while switching on

the instrument, that means that the instrument is out of range more than

±3°. Adjust the position of the instrument by means of the bubble level with

the help of legs or tripod.

6. Aim the down point on the required point on the floor. Rotate the upper

part of the instrument to adjust vertical lines. Then adjust the position of

the instrument with the help of fine adjustment screw.

7. Line laser has several operating modes. Press button (1) to select laser

lines. Variants of projections: - horizontal beam and down point;- horizontal

beam and vertical beam, down point; - horizontal beam and 3 vertical beams,

down point. - orizontal beam and 4 vertical beams, down point.

DETECTOR (IS NOT SUPPLIED WITH THE TOOL)

1. On/Off button

2. Signal LEDs