Ada ULTRALINER 360 4V Green А00540 Инструкция к товару онлайн [6/24] 818940

6 English

3. Bubble level

4. Sensitive element

5. Sound Off button

6. Clamp on the staff

7. Dynamic loudspeaker

APPLICATION OF THE DETECTOR

Application of the detector is a decisive advantage when working outside

in sunny weather. Press button (3) to switch on the detector mode. Open

the battery cover and insert the battery into the detector. Press On/O

button to switch on the detector. Bring the receiver to the place of beam

location. When laser beam will be on the sensitive element, there will be

sound alarm and one of the LEDs will ash. LED will show the direction

for the receiver for beam detection. Move the receiver until you will hear

continious sound alarm and middle signal LED will ash. With the help of

bubble level check the leveling of the receiver housing. Mark the surface.

Place the detector on the sta with the help of clamp.

TO CHECK THE ACCURACY OF LINE LASER (SLOPE OF PLANE)

Place line laser on the tripod 5m away from the wall so the horizontal laser

line will be directed to the wall. Switch on the power. The instrument

starts to self-level. Mark point A on the wall to show the contact of laser

beam with the wall. Turn the instrument by 90° and mark points В, С, D

on the wall. Measure distance “h” between the highest and lowest points

(these are A and D points in the picture). If “h”is ≤ 6 mm, the measurement

accuracy is good. If “h” exceeds 6 mm, apply service center.

TO CHECK PLUMB

Choose a wall and set laser 5 m away from the wall. Hang a plumb with

the length 2.5 m on the wall. Turn on the laser and make the vertical laser