Makita CXT SC103DZ [9/36] Cordless threaded rod cutter safety warnings

9 ENGLISH

Do not let familiarity gained from frequent use

of tools allow you to become complacent and

ignore tool safety principles.Acarelessactioncan

causesevereinjurywithinafractionofasecond.

Always wear protective goggles to protect your eyes

from injury when using power tools. The goggles

must comply with ANSI Z87.1 in the USA, EN 166 in

Europe, or AS/NZS 1336 in Australia/New Zealand. In

Australia/New Zealand, it is legally required to wear

a face shield to protect your face, too.

It is an employer's responsibility to enforce

the use of appropriate safety protective equip-

ments by the tool operators and by other per-

sons in the immediate working area.

Power tool use and care

Do not force the power tool. Use the correct power tool

for your application.Thecorrectpowertoolwilldothejob

betterandsaferattherateforwhichitwasdesigned.

Do not use the power tool if the switch does not turn

it on and off.Anypowertoolthatcannotbecontrolled

withtheswitchisdangerousandmustberepaired.

3. Disconnect the plug from the power source

and/or remove the battery pack, if detachable,

from the power tool before making any adjust-

ments, changing accessories, or storing power

tools.Suchpreventivesafetymeasuresreduce

theriskofstartingthepowertoolaccidentally.

Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool

or these instructions to operate the power tool.Power

tools are dangerous in the hands of untrained users.

Maintain power tools and accessories. Check for

misalignment or binding of moving parts, break-

age of parts and any other condition that may

affect the power tool’s operation. If damaged, have

the power tool repaired before use.Manyaccidents

arecausedbypoorlymaintainedpowertools.

6. Keep cutting tools sharp and clean.Properly

maintained cutting tools with sharp cutting edges

arelesslikelytobindandareeasiertocontrol.

7. Use the power tool, accessories and tool bits

etc. in accordance with these instructions, tak-

ing into account the working conditions and

the work to be performed. Use of the power tool

for operations different from those intended could

result in a hazardous situation.

Keep handles and grasping surfaces dry, clean

and free from oil and grease.Slipperyhandlesand

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

9. When using the tool, do not wear cloth work

gloves which may be entangled. The entangle-

mentofclothworkglovesinthemovingpartsmay

resultinpersonalinjury.

Battery tool use and care

1. Recharge only with the charger specied by

the manufacturer.Achargerthatissuitablefor

onetypeofbatterypackmaycreateariskofre

whenusedwithanotherbatterypack.

2. Use power tools only with specically desig-

nated battery packs.Useofanyotherbattery

packsmaycreateariskofinjuryandre.

3. When battery pack is not in use, keep it away

from other metal objects, like paper clips,

coins, keys, nails, screws or other small metal

objects, that can make a connection from one

terminal to another.Shortingthebatterytermi-

nalstogethermaycauseburnsorare.

Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact acci-

dentally occurs, ush with water. If liquid con-

tacts eyes, additionally seek medical help.Liquid

ejectedfromthebatterymaycauseirritationorburns.

5. Do not use a battery pack or tool that is dam-

aged or modied.Damagedormodiedbatteries

mayexhibitunpredictablebehaviourresultingin

re,explosionorriskofinjury.

6. Do not expose a battery pack or tool to re or

excessive temperature.Exposuretoreortem-

peratureabove130°Cmaycauseexplosion.

7. Follow all charging instructions and do not

charge the battery pack or tool outside the

temperature range specied in the instruc-

tions.Chargingimproperlyorattemperatures

outsidethespeciedrangemaydamagethe

batteryandincreasetheriskofre.

Service

1. Have your power tool serviced by a qualied

repair person using only identical replacement

parts.Thiswillensurethatthesafetyofthepower

tool is maintained.

2. Never service damaged battery packs. Service

ofbatterypacksshouldonlybeperformedbythe

manufacturer or authorized service providers.

3. Follow instruction for lubricating and chang-

ing accessories.

Cordless threaded rod cutter safety

warnings

1. Hold the tool rmly.

2. Secure the workpiece rmly.

Keep your face and hands away from moving parts.

Duringcutting,thefractionofthethreadedrodmayyoff.

4. Always wear gloves when handling threaded

rods.Edgesandchipsoftheworkpiecearesharp.

5. Do not put the tool on the chips of the work-

piece. Otherwise it can cause damage and

trouble on the tool.

Always be sure you have a rm footing. Be sure no

one is below when using the tool in high locations.

7. Do not touch the cutting edge or the workpiece

immediately after operation; they may be

extremely hot and could burn your skin.

Makita CXT SC103DZ [9/36] Cordless threaded rod cutter safety warnings

Содержание

Похожие устройства