Kuppersberg ICS 311 6425 [43/80] Connecting the hob to the mains power supply

Kuppersberg ICS 311 6425 [43/80] Connecting the hob to the mains power supply
43
ENGLISH TECHNICAL PASSPORT
Built-In Induction Hob
Precautions
 The induction hotplate must
be installed by qualied personnel or
technicians. We have professionals at
your service. Please never conduct the
operation by yourself.
 The hob will not be installed
directly above a dishwasher, fridge,
freezer washing machine or clothes
dryer, as the humidity may damage the
hob electronics.
 The induction hotplate shall
be installed such that better heat
radiation can be ensured to enhance its
reliability.
 The wall and induced heating
zone above the table surface shall
withstand heat.
 To avoid any damage, the
sandwich layer and adhesive must be
resistant to heat.
 A steam cleaner is not to be
used.
Connecting the hob to the
mains power supply
This hob must be connected to the
mains power supply only by a suitably
qualied person
Before connecting the hob to the
mains power supply, check that:
1. The domestic wiring system is
suitable for the power draw by the hob.
2. The voltage corresponds to the
value given in the rating plate.
3. The power supply cable sections
can withstand the load specied on
the rating plate. To connect the hob
to the mains power supply, do not use
adapters, reducers, or branching devices,
as they can cause overheating and re.
The power supply cable must not touch
any hot parts and must be positioned
so that its temperature will not exceed
75
0
C at any point.
Check with an electrician whether
the domestic wiring system is suitable
without alterations.
Any alterations must only be made
by a qualied electrician.
 If the cable is damaged or
to be replaced, the operation must be
carried out by after-sale agent with
dedicated tools to avoid any accidents.
 If the appliance is being
connected directly to the mains an
omnipolar circuit-breaker must be
installed with a minimum opening of
3mm between contacts.
 The installer must ensure
that the correct electrical connection
has been made and that it is compliant
with safety regulations.
 The cable must not be bent or
compressed.
 The cable must be checked
regularly and replaced by authorised
technicians only.

Содержание

Скачать