Karcher HDS 1195-4 S Eco [28/484] Operation

Karcher HDS 1195-4 S Eco [28/484] Operation
– 5
If you want to suck in water from an exter-
nal vessel, the following modification is
necessary:
Remove water connection from the
pump head.
Unscrew the upper supply hose with the
fine filter to the swimmer container and
connect it to the pump head.
Connect suction hose (minimum diame-
ter 3/4“) with filter (accessory) to the
water connection point.
Max. suck height: 0.5 m
Until the pump sucked in water, you should:
Turn the pressure and quantity regula-
tion to MAX.
Close the dosing valve for the deter-
gent.
Danger
Never suck in water from a drinking water
container. Never suck in liquids which con-
tain solvents like lacquer thinner, petrol, oil
or unfiltered water. The sealings within the
device are not solvent resistant. The spray
mist of solvents is highly inflammable, ex-
plosive and poisonous.
For connection values, see technical
data and type plate.
The electrical connections must be
done by an electrician according to IEC
60364-1.
Danger
Danger of injury by electric shock.
Unsuitable extension cables can be
hazardous. Only use extension cables
outdoors which have been approved for
this purpose and labelled with a suffi-
cient cable cross section:
Always unwind extension lines com-
pletely.
The plug and coupling of the extension
cable used must be watertight.
Caution
The highest allowed net impedance at the
electrical connection point (refer to techni-
cal data) is not to be exceeded. In case of
confusion regarding the power impedance
present on your connection, please contact
your utilities provider.
Caution
Check direction of rotation of the engine at
every socket change.
With correct direction of rotation a
strong airflow can be felt out of the ex-
haust opening of the burner.
Figure 16
Exchange the poles at the device plug if
the rotation direction is wrong .
Danger
Risk of explosion!
Do not spray flammable liquids.
Danger
Risk of injury! Never use the appliance
without the spray lance attached. Check
and ensure proper fitting of the spray lance
prior to each use. The screw connection of
the spray lance must be fingertight.
Caution
Never operate device with empty fuel tank
The fuel pump will otherwise be destroyed.
Warning
Long hours of using the appliance can
cause circulation problems in the hands on
account of vibrations.
It is not possible to specify a generally valid
operation time, since this depends on sev-
eral factors:
Proneness to blood circulation deficien-
cies (cold, numb fingers).
Low ambient temperature. Wear warm
gloves to protect hands.
A firm grip impedes blood circulation.
Suck in water from vessel
Power connection
Operation
Safety instructions
Only HDS Super M / MX Eco
28 EN

Содержание

Скачать