Zalman RESERATOR 2 [9/18] Reserator 2

English

RESERATOR 2

※

The specifications of any product may change without prior notice to improve performance.

5. Installation Guide

5. 1 Determine the Placement of the

Reserator

The Reserator’s placement should be determined

in relation to the position of the PC.

Place it upright next to or slightly above the PC.

Note that if the Reserator is placed lower than

the PC, the PVC tube’s internal air pressure

may prevent proper initial operation.

5. 2 Install the Supports

Install the enclosed Supports on to the Tab

located on the bottom of the Reserator with

the use of Bolts.

5. 3 Fill the Coolant

1) Take off the Reserator Cover after unscrewing

its Bolts.

2) Fill with the provided coolant (ZM-G300,

250㎖) and one liter of distilled water.

Note 1) Fill in approximately 50% to avoid

overflow within the Reservoir, and

must refill because the water level

decreases once the coolant begins to

circulate after perfectly releasing the

air within the Reservoir.

Note 2) The provided coolant is a concentrate,

and must be mixed down with distilled

water in the ratio of 1:4.

Note 3) Read the warning label on the coolant

before use.

Note 4) Keep this product and its associated

system away from children.

((OO)) ((OO))

((XX)) ((XX))

Bolt

Reservoir Cover

Reservoir

Distilled Water

G300