Zalman CNPS7000B-Cu LED [5/9] Installation intel pentium 4 478

※

The specifications of any product may change without prior notice to improve performance.

3) AMD Sempron / AMD64 - Socket 754/939/940

All CPUs conforming to Socket 754/939/940 platform

Cautions )

① No motherboard components with a height greater than 39mm, as

well as the PSU, disk drives, VGA card, and RAM should be present

within a 55mm radius from the center of the CPU.

② For more information, please visit the Zalman website and refer to

“CNPS7000(A/B) Compatible Socket 754/939/940 Motherboards

List”

link.

1) Apply Thermal Grease

Clean off particles and residue then spread a thin layer of

thermal grease on the CPU.

2) Install Clip Supports for Socket 478

Install the clip supports for socket 478 on both sides of

the retention guide as shown in the diagram.

3) Insert Bolts

Insert the two bolts into the inner holes of the clip.

4) Place FHS

Set the FHS at the center of the CPU. Screw the bolts in

slightly, then tighten each bolt a few turns at a time while

alternating between the two until the clip supports are

completely pressed against the clip.

7. Installation (Intel Pentium 4 - 478)

5) Connect Power (How to use FAN MATE 2)

◆

Please refer to FAN MATE 2 Installation and Usage on page 7.

FHS

Clip Support for

Socket 478

Bolt

Inner Hole

Clip

Retention Guide

Clip Support for Socket 478

󳃨

󳃧

󳃪

CPU (IHS)

Thermal Grease

①