Kenwood MG354 (0W21910007) [11/21] Troubleshooting guide

troubleshooting guide

Problem Cause Solution

Meat grinder does not No power. Check meat grinder is

perate. plugged in.

Check the fuse/circuit breaker

in your home.

f none of the above see

“service and customer care”

section.

Meat Grinder stops or Stalls due to food Switch off and turn the

slows during operation. clogging. control to R(reverse) for a few

seconds to release clogged

food.

Poor minced results. Cutter fitted the Check cutter fitted correctly

wrong way round. with cutting side facing

outermost.

Clogging occurring Switch off and unplug and

behind the screen. dismantle the attachment.

Clean and refit.

Food forced down Gently guide the food down

feed tube too the feed tube using the

quickly. pusher, one piece at a time.

Allow the scroll to pick up

each piece before adding the

next piece.

Ring nut difficult to Overtightened when Tighten the ring nut firmly by

remove after mincing fitted. hand.

process. Use the spanner supplied to

undo after use.

Meat grinder attachment Meat grinder Hold the release button down

cannot be removed from attachment not on the top of the power unit

power unit. unlocked from as you rotate the feed tube

power unit. towards the front of the meat

grinder.