Buffalo TS-WX2.0TL/R1 [14/66] Auto power mode

TeraStation Setup Manual 13

The TeraStation can be congured to automatically turn on and o with your computer. To use this feature, install NAS

Navigator 2 on your computer(s) and then set the power mode switch on the back of your TeraStation to “Auto”.

Notes:

• After you turn o your computer, it may take several minutes for the TeraStation to shut down.

• When the power mode switch is changed from Auto to Manual or vice-versa, it takes about ve minutes

for the change to take eect.

• Power on the TeraStation before moving the switch to the Auto position.

• Auto Power Mode doesn’t work if port trunking is enabled or if NasNavi detection is disabled.

• Install NAS Navigator 2 on all computers that will be accessing the TeraStation before switching to Auto

Power Mode.

• Some networks may not support the Auto Power Mode. If you have problems with it, just use Manual

Power Mode.

Manual (default):

In this position, the power button on the front of the TeraStation turns it

on and o. It is not aected by the power state of connected computers.

Auto:

In this position, if all connected computers are turned o, the TeraStation

will turn o too. If a connected computer is powered on, the TeraStation

will power on too.

<TS-XL Series> <TS-XEL Series>

<TS-WXL/R1, TS-WXL/1D

Series>

<TS-RXL Series>

Auto Power Mode