Home
Главная
Tefal
Электрические Чайники
Sense KO693110 белый, хороший
Инструкция по эксплуатации Страница: 13

Tefal Sense KO693110 белый, хороший Инструкция по эксплуатации онлайн [13/0] 893464

2. PLACE THE BASE ON A FLAT, STABLE, HEAT-RESISTANT SURFACE AWAY FROM WATER

SPLASHES AND ANY SOURCES OF HEAT.

•

Kettle is only to be used with the base provided.

3. FILL THE KETTLE WITH THE DESIRED AMOUNT OF WATER. (g 3)

•

Never fill the kettle when it is on its base.

•

Do not fill it above the maximum level, or below the minimum level. If the kettle is too full,

boiling water may spill out.

•

Do not use without water.

•

Check that the lid is closed properly before use.

4. POSITION THE KETTLE ON ITS BASE. PLUG IT INTO THE MAINS SOCKET.

5. TO START THE KETTLE

When the kettle is placed on the base, all the lights illuminate. The water temperature in the kettle

is displayed on-screen.

TO HEAT WATER:

2 options:

• If you wish to start a boil cycle, press the

button, the actual temperature appears directly

on the screen, the kettle beeps and starts heating the water. The kettle beeps twice once water

temperature reaches 100°C.

• If you wish to select the temperature – 5 possible settings: 40°C – 70°C – 80°C – 90°C – 100°C –

press the

key until it displays the temperature you wish to select. The selected temperature

blinks twice, then stays at actual temperature. The kettle beeps and the kettle starts heating the

water.

You can monitor the live temperature of the water on the screen.

Once the selected temperature is reached, the kettle beeps twice and stops heating.

If you wish to turn off the heating programs, just press the

or .

KEEP WARM MODE

You can use the keep warm mode to keep the water at your desired temperature during 30 minutes.

Once the temperature has been selected, a long push on or will activate the keep warm

mode at selected temperature. 2 lights around the will be illumed.

You can also start the keep warm mode once the temperature has been reached. Do a long push

on the or key. The will let you keep warm at selected temperature, while will let

you keep warm at 95°C. 2 lights around the

will be illumed.

If you wish to turn off the keep warm mode, just press the

or key.

PLEASE NOTE

The long push will activate the keep warm only if you push the button less than 30 seconds after

the end of the boiling cycle, otherwise the screen will switch off.

PLEASE NOTE

The screen automatically switches off after 30 seconds – unless you have selected the keep warm

mode – but pressing any key will turn the screen on again anytime.

If you select 100°C and activate the keep warm function, the kettle keeps the temperature at 95°C

for 30mins.

If the temperature of the water in the kettle is higher than the temperature you select when

pressing

, the heating won’t start.

For instance, if the water temperature is 90°C, you won’t be able to launch the heating by

selecting 40°C, 70°C or 80°C.

Tefal Sense KO693110 белый, хороший Инструкция по эксплуатации онлайн [13/0] 893464

Содержание

Похожие устройства