Kranzle Therm 891 E-ST 48 [20/64] Decommissioning frost protection

Decommissioning - frost protection

1. Switch off the machine - main switch to „0“- position

2. Cut off the water supply

3. Open the spray gun briefly until the pressure is released

4. Apply the safety catch on the spray gun

5. Remove the water hose and spray gun

6. Drain the pump: switch on the motor for approx. 20 seconds

7. Pull the plug from the socket

8.Clean HP hose and stow away

9.Clean water filter

Frost protection

Themachineisnormallystillpartiallyfilledwithwaterafterworkhasbeencompleted.

In case the high-pressure cleaner is exposed to frost:

To protect the appliance from frost, completely empty it of water:

Disconnectthemachinefromthewatersupplyandswitchofftheignition.Switchonthe

masterswitchandopenthegun.Thepumpnowpressestheremainingwateroutofthe

watertank,thepumpandthecontinuous-flowheater.

Do not allow the machine to run for longer than a minute without water.

Ifthemachineisnotinuseforlengthyfrostyperiodsoftime,itisadvisabletopump

anti-freezeintothemachine:Forthispurpose,filltheantifreezeagentintothewater

tankandswitchonthemachinewithoutignition.Waitwithopenedgun,untiltheagent

comesfromthenozzle.

However, the best protection against frost is to keep the machine in a place that is

safe from frost.