Kranzle Therm 891 E-ST 48 [21/64] Care and maintenance

Change the oil:

Firstoilchangeafterapproximately

50 operating hours.Thereaftertheoil

shouldbechangedevery500operating

hoursoryearly.

Taketheoildrainagehose,whichis

connectedtotheoildrainagescrewfromthe

insideoftheappliance.

Opentheredoilllerplugatthetopsideof

theblackoilhousing.

Openthecapattheendofthehose.Drain

offtheoilintoanoilpananddisposeofit

responsibly.Closetheendofthehose.Rell

withnewoil.

Weekly, or after approx. 40 hours of operation:

-Checktheoillevelofthehighpressurepump.Iftheoillevelistoolow,addoiluntil

 theoillevelisbetweenthetwomarkingsontheoilmeasuringrod.

 Changetheoilifithasagreyorwhitishappearance.Theoilshouldbe

 disposedofresponsibly.



-Checkthewaterfilterinfrontofthefloatvalveinthewatertankandthefuelfilter

 infrontofthesolenoidvalve.Cleanthefiltersifnecessary.

Yearly, or after approx. 500 hours of operation:

-Desulphuriseanddecarbonizethecontinuous-flowheater.

-Changetheoil

Oil leakage: If oil leaks out, go to the nearest customer service

(dealer) immediately. (Environmental damages, transmission

damages)

In case of increased humidity or fluctuations in temperature

development of condensed water is possible; if the oil turns grey,

you must change it at once.

Care and Maintenance

The machine must be disconnected from the power supply when

servicing work is being carried out. The main switch should be in

position "0" and the plug out of the socket.

