Stiga MULTICLIP 53 S PLUS [38/106] English

Stiga MULTICLIP 53 S PLUS [38/106] English
ENGLISH
GB GB
Stop the engine and remove the spark plug cable
from the spark plug.
Dismantle the transmission casing. Undo the screw
L. Pull the transmission forwards so that the belt is
tensioned and tighten the screw
L.
The drive belt must be adjusted so that the shoul-
der bolt Z is centred in the front hole on the engine
bracket.
SHOCK-ABSORBER
Fig. 18. Check the shock-absorber and the insulat-
ing sleeves twice per season. Replace in the event
of damage or wear.
CHANGING BLADES
To replace the blade, undo the screw (fig. 19-20).
Fit the new blade so that the stamped logo is
turned up facing the blade holder (not facing the
grass).
Reinstall as illustrated. Tighten the screw properly.
Tightening torque 40 Nm.
When replacing the blade, the blade screw should
also be replaced.
SHARPENING THE BLADES
Sharpening of the blades must be done by wet
method grinding, using a whetstone or a grind-
stone.
For safety reasons, the blades should not be
sharpened on an emery wheel. A very high temper-
ature could cause the blades to become brittle.
STORAGE
The same petrol must not remain in the tank for
more than one month.
Thoroughly clean the mower and store it indoors in
a dry place.
SERVICING
Genuine spare parts are supplied by service work-
shops and by many dealers.
We recommend that you take the machine to an
authorised service station for annual servicing,
maintenance and inspection of safety equipment.
For service and spare parts, please contact the
dealer where the machine was purchased.
36

Содержание

Похожие устройства

Скачать