Bosch ROTAK 32 [19/261] Assembly
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Bosch ROTAK 32 [19/261] Assembly

Bosch ROTAK 32 [19/261] Assembly
English | 19
Bosch Power Tools F 016 L70 585 | (10.11.09)
Noise/Vibration Information
Measured sound values determined according
to 2000/14/EC (1.60 m height, 1 m distance
away).
Typically the A-weighted noise levels of the
product are: Sound pressure level 79 dB(A);
sound power level 93 dB(A). Uncertainty
K=1dB.
Vibration total values (triax vector sum) deter-
mined according to EN 60335:
Vibration emission value a
h
<2.5 m/s
2
,
Uncertainty K =1.5 m/s
2
.
Declaration of Conformity
We declare under our sole responsibility that
the product described under “Technical data” is
in conformity with the following standards or
standardization documents: EN 60335 accord-
ing to the provisions of the directives
2004/108/EC, 98/37/EC (until 28 Dec 2009),
2006/42/EC (from 29 Dec 2009), 2000/14/EC.
2000/14/EC: Guaranteed sound power level
94 dB(A). Conformity assessment procedure
according to Annex VI.
Equipment category: 32
Notified body:
SRL, Sudbury, England, Nr. 1088
Technical file at:
Bosch Lawn and Garden Ltd., PT-LG/EAE,
Stowmarket, Suffolk IP14 1EY, England
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
09.11.2009
Assembly
For Your Safety
f Warning! Switch off, remove plug from
mains before adjusting, cleaning or if cable
is cut, damaged or entangled.
f The blades continue to rotate for a few sec-
onds after the machine is switched off.
f Caution – do not touch the rotating blade.
Electrical Safety
Your machine is double insulated for safety and
requires no earth connection. The operating
voltage is 230 V AC, 50 Hz (for non-EU countries
220 V, 240 V as applicable). Only use approved
extension cables. Contact your Bosch Service
Centre for details.
Extension cords/leads should only be used if
they comply with H05VV-F, H05RN-F types or
IEC type design (60227 IEC 53, 60245 IEC 57).
If you want to use an extension cable when op-
erating your product, only the following cable di-
mensions should be used:
–1.0mm
2
: max. length 40 m
– 1.5 mm
2
: max. length 60 m
– 2.5 mm
2
: max. length 100 m
Note: If an extension cable is used it must be
earthed and connected through the plug to the
earth cable of your supply network in accord-
ance with prescribed safety regulations.
If in doubt contact a qualified electrician or the
nearest Bosch Service Centre.
f WARNING! Inadequate extension cables
can be dangerous. Extension cable, plug
and socket must be of watertight construc-
tion and intended for outdoor use.
Cable connections should be kept dry and off
the ground.
It is recommended for increased electrical safe-
ty to use a Residual Current Device (RCD) with
a tripping current of not more than 30 mA. Al-
ways check your RCD every time you use it.
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Head of Product
Certification
OBJ_BUCH-1068-001.book Page 19 Tuesday, November 10, 2009 9:41 AM

Содержание

Похожие устройства

Скачать