D-Link DSL-524T [12/16] Configuring the router continued

Configuring the Router (continued)

Static IP Connections

Static IP is used to set the Static IP mode for the Router. Static IP is used whenever a known

static IP address is assigned. The accompanying information such as the Subnet mask and

the gateway should also be specified in order to be able to connect. These are the servers

would enable you to have access to other web servers. Information entered here must come

from your ISP. You may change the PVC (Permanent Virtual Channel) settings and the

Encapsulation.

Type the IP addresses

for the WAN IP

Address, Subnet Mask,

ISP Gateway Address,

Primary DNS Address

and/or Secondary DNS

Address, as instructed

by your ISP.

If you have

been told to

change the

VPI or VCI

number,

Type the new

values.

Select the Connection Type as

1483 Bridged IP LLC, 1483

Bridged IP VC-Mux, 1483 Routed

IP LLC, 1483 Routed IP VC-Mux

or IPoA, as instructed by your ISP.

Click the Next button. Skip ahead to the Setup

Completed menu below.