Freggia LUF193X [10/28] Cleaning
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Freggia LUF193X [10/28] Cleaning

Freggia LUF193X [10/28] Cleaning
10
TECHNICAL ASSISTANCE SERVICE
WARNING! Do not use any mechanical devices or other articial methods
other that those recommended by the manufacturer for accelerating the
defrosting process.
WARNING! Unless otherwise approved by the manufacturer, do not use
electrical appliances inside the food storage compartment.
CLEANING
WARNING! Before starting any cleaning, disconnect the appliance from
the mains electricity supply.
WARNING! The protections (wire grill, covers) must not be removed by
unqualiedpersonnel: do not use the appliance if the protections have
been removed.
CLEANING THE INTERNAL PLASTIC PARTS AND THE DOOR
GASKET:
Use a warm solution of bicarbonate of soda (two spoonfuls in two litres of water).
IMPORTANT!
Do not use abrasives or detergents of any kind.
CLEANING THE CONDENSER
This should be carried out at least twice a year.
Clean using a domestic vacuum cleaner or a brush. A dirty condenser will have a
negative eect on the appliance and reduce its performance.
FOR PROLONGED ABSENCES
• Empty the compartments.
• Disconnect the appliance from the mains electricity supply.
• Clean both the compartments and dry them.
• Leave the doors open to prevent bad smells or mould from forming.
TROUBLESHOOTING
1. The appliance does not work. Check that:
• Is there a power cut?
• Is the plug inserted properly in the mains socket?
• Is the power supply cable damaged?
• Is the temperature setting correct?
2. The temperature inside the compartments is not low enough. Check that:
• Do the doors close properly?
• Is the appliance installed near to a heat source?
• Is the temperature setting correct?
• Is the condenser clean?
3. The temperature inside the fridge compartment is too low. Check that:
• Is the thermostat in the right position?
4. The appliance is very noisy. Check that:
• Is the appliance in contact with other furniture or objects?
• Are the pipes on the back touching or vibrating?
• Is the appliance level?
POWER CUT TECHNICAL ASSISTANCE SERVICE
Before contacting the Assistance Service:
• Check whether it is possible to rectify the problem by referring to
the“Troubleshooting” guide.
• Restart the appliance to check whether the problem has been resolved. If
theproblem still exists, disconnect the appliance from the mains electricity
supplyand repeat the operation after one hour.
If the appliance is not working properly or not working at all, before calling
theTechnical Assistance Service check that:
• The plug is inserted properly in the mains socket.
• The mains supply is working.
• The temperature is set correctly.
• The doors close properly.
• The power supply voltage corresponds to that of the appliance (± 6%).
• If the problem still exists, call the Assistance Service.
• INFORM THE ASSISTANCE SERVICE OF:
• The type of malfunction
• The appliance model
• The serial number
The manufacturing rm refuses all responsibility for any possible imprecision in this
booklet, due to misprints or clerical errors. It reserves the right to make all the changes
that it will consider necessary in its own products, without eecting the essential
characteristics of functionality and safety.

Содержание

Похожие устройства

Скачать