Kramer K202B [18/22] Switch between computers using front panel push buttons

Secure 2-Port KVM Switch User Manual

Now that you have connected your console and computers to the

Switch, it is ready for use. Default channel after power up is channel

#1 as indicated by channel select LED #1 illumination. You can select

which computer you wish to control by one of the following methods:

1. Switch between computers using front panel push-buttons

You can select which computer you wish to control by momentarily

pressing the corresponding port selector push-button on the front of

the Switch. The LED number will illuminate to indicate which

computer (or port) is currently selected. It may take approximately 1

second for the video signal to sync after switching ports. This is

normal behavior and is dependent on the display connected. This is

normal operation and ensures that proper synchronization is

established between the display and the connected computers.

Note that keyboard and mouse inputs can only be sent to the

selected computer, and video outputs can only be received from the

selected computer. The Switch also prevents any data transfer

between connected computers, ensuring the security of your

computers.

2. Switch between computers using keyboard shortcuts

You can select which computer you wish to control by typing key

combinations on the keyboard.

To switch KVM to another channel press CNTL+CNTL+ “Channel

number” for example for computer #2 press CNTL+CNTL+2.

Note: The Secure KVM Switch does not have a power switch. It is

highly recommended that the product will be powered continuously.

Important Security Note:

If you are aware of potential security vulnerability while installing

or operating this product, we encourage you to contact us

immediately at the following email address:

http://www.highseclabs.com/support/case/