Kramer TBUS-1Axl [17/26] Installing the si 1vga rc 3tb

14 TBUS-1Axl - Installing the TBUS-1Axl

2. Place the T-RC8IR over the RC-8IR enclosure so that both face plate holes

are aligned with the face plate holes on the RC-8IR enclosure and the IR IN

receiver fits into the IR IN opening.

3. Insert the faceplate screws through the T-RC8IR and RC-8IR enclosure

faceplate holes, and tighten.

Installation Instructions

To install the T-RC8IR:

1. Insert the T-RC8IR assembly through the dual power socket opening from

beneath.

2. Use the two power socket screws to tighten the T-RC8IR assembly in

place.

5.1.6 Installing the SI-1VGA / RC-3TB

To install the SI-1VGA / RC-3TB module, place it under the designated opening in

the T1AF-14L (P/N: 80-000699) and then screw and tighten it in place using two

screws supplied with the inner frame.

5.2 Installing the Inner Frame

To install the inner frame:

1. Place the inner frame inside the TBUS-1Axl enclosure.

2. Set the required height using your fingers to bring the inner frame to the

desired position, screw and tighten it in place using the height adjustment

screws (supplied with the inner frame).

Inner frame kits come with assembly instructions.