Kramer UTBUS-1xl [12/18] Installing the cables

UTBUS-1xl - Installing the UTBUS-1xl

3. Reinsert the two screws

to affix the wall plate

insert in position, and

tighten them.

5.2 Installing the Cables

To install the cables, do the following:

1. Connect the cables to the inside of the unit.

2. Insert the self-locking ties through the tie holes to secure the cables to the

inside walls of the enclosure.

5.3 Installing the Power Socket

To install the power socket:

1. Insert the modular power socket in its place (in this example, a universal

power socket is shown, but you can use any of the available power sockets,

see Section 4.1).

2. Tighten the two screws (supplied with the power socket module).

The power socket is now installed.

Figure 3: Installing the Power Socket