Kramer Sierra Viper 6464CVR-64 [75/88] V connect levels

VIPER COMPOSITE SERIES

and no additional crosspoint change reports will be sent because they already HAVE

been sent. The U2 mode of operation is generally more convenient because it produces

more immediate feedback to the controlling device that is sending a crosspoint change

command. The U1 mode of operation is provided for compatibility with older control

systems.

“V”: Connect Levels

The command "V" is used to request that a connection be made. It must be followed by

an output number, a comma, and a comma-separated list of input numbers, one for each

level, up to the number of levels in the router. Fewer than the number of levels may be

specified if desired, and the remaining levels will be left unchanged.

For example, the command:

**V12,7,8,9!!

says that connections are to be made to output 12: from input 7 on level 1, input 8 on

level 2, and input 9 on level 3.

An input number of 0 means the output connection is to be left unchanged.

An input number of ë-ë (dash) means the output is to be disconnected. If the router does

not support disconnected outputs, the output connection will be left unchanged.

“W”: Connect Outputs

The command "W" is used to request that a connection be made. It must be followed by a

level number, a comma, and a comma-separated list of input numbers, one for each

output, up to the number of outputs in the router. Fewer than the number of outputs may

be specified if desired, and the remaining outputs will be left unchanged.

For example, the command:

**W1,17,3,9!!

says that connections are to be made on level 1: from input 17 to output 1, input 3 to

output 2, and input 9 to output 3.

If the level number is specified as "0", this means that the connection is to be made on all

levels (AFV).

For example, the command:

**W0,8,3,7!!

says that connections are to be made on all levels: from input 8 to output 1, input 3 to

output 2, and input 7 to output 3.

An input number of 0 means the output connection is to be left unchanged.

An input number of ë-ë (dash) means the output is to be disconnected. If the router does

not support disconnected outputs, the output connection will be left unchanged.

It is an error to request connection of an input or output that doesn’t exist on the specified

level, even if the input or output does exist on some other level. However, if the level

number is “0”, any input or output may be used as long as it exists on at least one level,

and in that case no connection will be made on any level on which the input and output

does not exist. If the requested connection has an output or input number that isn’t

mapped to a physical connector (on virtual-mapped routers) on one or more levels, those

levels are simply not changed.